Instruction Manual

Index
April 2014
Instruction Manual
D103176X012
102
Control Mode, 37
Critical NVM Fail, Self Test Failure, enabling to cause
instrument shutdown, 51
Critical NVM Failure, 62
CSA, Hazardous Area Classification, 5
Custom Char Selected, 63
Cycl Cnt Alrt Enab, 49
Cycl Count Alrt Pt, 49
Cycle Counter
Displaying Value, 59
Enabling Alert, 49
Resetting, 50
Cycle Counter Alert, 61
Cycle Counter Alert Enable, 49
Cycle Counter Alert Point, 49
Cycle Counter Deadband, 49
D
Date, 42
Declaration of SEP, 6
Descriptor, 41
Detailed Setup, via Local Interface, 29
Device ID, 60
DVC2000, Hardware, 60
Device Information, 60
Device Locked by HART, 35
Device Rev, 60
Device Revision, 60
Diagnostic in Progress, 63
Diagnostic Messages, Codes and Details, 35
Check I/P Converter, 35
Check Mounting, 35
Check Supply, 35
Device Locked by HART, 35
Pressure = ???, 35
Replace Main Board, 35
SWITCH 1 ???, 35
SWITCH 2 ???, 35
Travel Deviation, 35
Digital Calibration Adjust, 55
Display Record, 50
Drive Alert Enab, 50
Drive Alert Enable, 50
Drive Current Fail, 51
Self Test Failure, enabling to cause instrument
shutdown, 51
Drive Current Failure, 62
Drive Signal, 59, 83
Displaying Value, 59
Enabling Alert, 50
Drive Signal Alert, 61
E
Educational Services, 8
Electrical Classification, 5
Electrical Housing, 5
Hazardous Area, 5
Electrical Connections, 19
Electromagnetic Compatibility, 5
EMC Summary Results, Immunity, 7
F
Factory Default Settings, 26
Failure Alerts, 62
Critical NVM Fail, 62
Drive Current Fail, 62
Flash ROM Fail, 62
No Free Time, 62
Offline/Failed, 62
Pressure Sensor Fail, 62
Ref Voltage Fail, 62
Temperature Sensor Fail, 62
Travel Sensor Fail, 62
Feedback system, 10
FIELDVUE Instruments, 35
filter, 19
Firmware Date, 60
Firmware Rev, 60
Firmware Revision, 60
Flash ROM Fail, 51
Self Test Failure, enabling to cause instrument
shutdown, 51
Flash ROM Failure, 62
FM, Hazardous Area Classification, 5