Data Sheet

ManualsBrandsEmerson ManualsControl ValvesEmerson Fisher easy-e ET

www.Fisher.com

Fisherr ET, EAT, and ETR

Sliding-Stem Control Valves

Fisher ET, EAT, and ETR general-purpose control valves

(figures 1, 2, and 3) are used for throttling or on-off

controlofawidevarietyofliquidsandgases.Allthree

valve designs have single ports, balanced valve plugs,

and cage guiding. Metal-to-PTFE seating for stringent

shutoff requirements is standard in all valves except

those with Cavitrolt III cages. Metal-to-metal seating

forhighertemperaturesisstandardforvalveswith

Cavitrol III cages and optional for all other valves.

The temperature limits of ET valves can be extended

above 232_C(450_F) by using PEEK

(PolyEtherEtherKetone) anti-extrusion rings in

combination with a spring-loaded PTFE seal. The PEEK

anti-extrusion rings expand to close off the clearance

gapbetweentheplugandthecagewherethePTFE

seal may extrude at high temperatures and pressures.

The temperature limits are extended to 316_C (600_F)

for non-oxidizing service and to 260_C(500_F) for

oxidizing service.

The ET product line is available for a wide range of

applications, including sulfide and chloride

stress-cracking environments common to the oil and

gas production industries. To discuss available

constructions, contact your Emerson Process

Management sales o ffice and include the applicable

codes and standards required for these environments.

The easy-et Valve Family

ET, EAT, and ETR control valves are part of the versatile

easy-e family of Fisher industrial control valves. easy-e

valves share the following characteristics:

 Multiple trim material choices

 Interchangeable, restricted-capacity trims and

full-sized trims to match variable process flow

demands

FISHER ET CONTROL VALVE

WITH 667 ACTUATOR

W1916-3

 Different cage/plug styles that provide particular

flow characteristics for highly-specialized

applications. The standard cage comes in three

different flow characteristics:

J quick-opening,

J linear, or J equal percentage.

 Whisper Trimt I, Whisper Trim III (figure 6), and

WhisperFlot cages (figures 4 and 5) attenuate

aerodynamic noise in gaseous service.

 To help eliminate cavitation damage in a

properly-sized valve, a standard-travel, Cavitrol III,

one-stage cage (figure 8) and a long-travel, Cavitrol

III, two-stage cage are available in the NPS 1

throughNPS8ETcontrolvalve.

ET Valve

D100022X012

Product Bulletin

51.1:ET

December 2012

Summary of content (28 pages)

PAGE 1
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Fisherr ET, EAT, and ETR Sliding-Stem Control Valves Fisher ET, EAT, and ETR general-purpose control valves (figures 1, 2, and 3) are used for throttling or on-off control of a wide variety of liquids and gases. All three valve designs have single ports, balanced valve plugs, and cage guiding. Metal-to-PTFE seating for stringent shutoff requirements is standard in all valves except those with Cavitrolt III cages.
PAGE 2
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Features  Compliance with the Clean Air Act– ENVIRO-SEAL™ packing systems (figures 9 and 10) that provide an improved stem seal to help prevent the loss of process fluid are available. These packing systems feature PTFE or Graphite ULF packing with live-loading for reduced packing maintenance.
PAGE 3
Product Bulletin ET Valve 51.
PAGE 4
Product Bulletin ET Valve 51.
PAGE 5
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 1.
PAGE 6
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 ENVIRO-SEAL, HIGH-SEAL Packing Systems ULF packing system (figure 10) is offered. The HIGH-SEAL packing system provides improved sealing at pressure/temperature ratings beyond ENVIRO-SEAL limits. ENVIRO-SEAL and HIGH-SEAL packing systems offer exceptional sealing capabilities. These systems easily install in existing valves or can be purchased with new valves. These systems help seal the process to conserve valuable process fluid.
PAGE 7
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Figure 1.
PAGE 8
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Figure 2. Fisher EAT Sectional Figure 3. Fisher ETR Sectional W0972-3 W1557-4 Figure 4.
PAGE 9
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Figure 5.
PAGE 10
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 5.
PAGE 11
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 6.
PAGE 12
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 8. Whisper Trim III Metal Trim Part Materials and Body/Trim Temperature Capabilities (NPS 6 Fisher ET with 5.
PAGE 13
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Figure 6. Metal Seat and Whisper Trim III Cage in NPS 6 Fisher ET Valve Figure 8. Cavitrol III One-Stage Cage BONNET SPACER CAGE RETAINER W2670 W3746A-4 Figure 7. Typical Balanced TSO Trim Figure 9.
PAGE 14
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Figure 10.
PAGE 15
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Figure 11.
PAGE 16
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Figure 12.
PAGE 17
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 9. Materials and Temperature Limits for Other Parts TEMPERATURE CAPABILITIES PART Cast iron body MATERIAL Cap screws Steel SAE Grade 5 Studs Steel SA-193-B7 Nuts Steel SA-194-2H Studs Steel SA-193-B7 WCC body Body-to-bonnet bolting.
PAGE 18
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 9.
PAGE 19
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 11.
PAGE 20
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 13. Port Diameters and Valve Plug Travel VALVE SIZE, NPS ET or ETR PORT DIAMETER(1) EAT MAXIMUM VALVE PLUG TRAVEL(1) Full-Sized Trim RestrictedCapacity Trim Full-Sized Trim RestrictedCapacity Trim mm Inch mm Inch 1 --1-1/2 --2 2-1/2 3 1-1/2 2 --2-1/2 3 4 --- 1 --2 ----3 4 2 ------4 6 --- 33.3 33.3 46.7 46.7 58.7 73.0 87.3 1.3125 1.3125 1.875 1.875 2.3125 2.875 3.4375 19.1 19.1 19.1 19.1 29 38 38 0.75 0.75 0.75 0.75 1.
PAGE 21
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 15. Port Diameters and Valve Plug Travel for Cavitrol III Cage ET VALVE SIZE, NPS ONE-STAGE CAGE Port Diameters TWO-STAGE CAGE Valve Plug Travel(1) Port Diameters Valve Plug Travel mm 1 33.3 25 25.4 25 1-1/2 47.6 22 33.3 38 2 58.7 29 47.6 51 2-1/2 73.0 38 58.7 64 3 87.3 41 7.30 76 4 111.1 54 73.0 102 6 177.8 57 136.5 102 8 203.2 86 177.8 152 Inch 1 1.3125 1 1 1 1-1/2 1.875 0.875 1.
PAGE 22
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 16. Port Diameters, Valve Plug Travel, Yoke Boss Diameters for TSO (Tight Shutoff) Trim VALVE PORT DIAMETER mm Inch mm Inch mm Inch mm Inch CV REDUCTION AT 100% TRAVEL(1) MAX TRAVEL TRIM YOKE BOSS SIZE Nominal Actual TSO UNBALANCE AREA Inch2 ET NPS 3 CAV III 2-Stage 76.2 3 90 127 3-9/16 5 73.0 2.875 68.3 2.6875 0% 0.098 ET NPS 4 CAV III 2-Stage 102 4 90 127 3-9/16 5 73.0 2.875 68.3 2.6875 5% 0.
PAGE 23
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 17. Metal Trim Part Materials for Compatibility with NACE MR0175 / ISO 15156 and MR0103 (Sour Service) Specifications. Environmental Restrictions Apply, Refer to Standard.
PAGE 24
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 19. Fisher ET and ETR Dimensions A Pressure Rating, End Connection Style (1) VALVE SIZE, NPS Scrd or SW CL125 FF or CL150 RF CL150 RTJ CL250 RF or CL300 RF CL300 RTJ 1 1-1/2 2 210 251 286 184 222 254 197 235 267 197 235 267 210 248 282 2-1/2 3 4 6 8 ----------- 276 298 353 451 543 292 311 365 464 556 292 317 368 473 568 1 1-1/2 2 8.25 9.88 11.25 7.25 8.75 10.00 7.75 9.25 10.50 2-1/2 3 4 6 8 ----------- 10.88 11.
PAGE 25
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 20. Fisher ET and ETR Dimensions D FOR PLAIN BONNET ET Except with Cavitrol III Two-Stage Cage Stem Diameter, mm VALVE SIZE, NPS ET with Cavitrol III Two-Stage Cage Stem Diameter, mm ETR Stem Diameter, mm 9.5 12.7 19.1 25.4 or 31.8 9.5 12.7 19.1 25.4 or 31.8 9.5 12.7 19.
PAGE 26
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Table 22. Fisher EAT Dimensions(1) Table 23. Fisher EAT Dimensions AA VALVE SIZE, NPS RF RTJ RF RTJ 1 2 3 4 6 92 127 149 176 225 98 133 156 183 232 98 133 159 184 237 105 141 167 197 244 CL150 CL300 DD CL600 BW, SW or RF RTJ 105 143 168 197 254 105 144 170 198 256 4.12 5.62 6.62 7.75 10.00 4.12 5.69 6.69 7.81 10.0 6 mm Inch 1 2 3 4 6 3.62 5.00 5.88 6.94 8.88 3.88 5.25 6.12 7.19 9.12 3.88 5.25 6.25 7.25 9.31 4.12 5.
PAGE 27
Product Bulletin ET Valve 51.1:ET December 2012 D100022X012 Ordering Information b. Normal flowing drop Inlet pressure and temperature must always be limited by the applicable ASME pressure/temperature rating. Pressure drop information for various trim material combinations is provided in figures 11, 12, and 14. The maximum allowable pressure drop for the application must not exceed the lowest value indicated for the combination of materials selected. c.
PAGE 28
Product Bulletin 51.1:ET December 2012 ET Valve D100022X012 Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.