Data Sheet
P/T Ratings for Valves (U.S. Units)
D101463X012
Product Bulletin
59.1:021
September 2013
2
Standard Pressure-Temperature Ratings for CL150 and
CL300 Valves
Fisher valve materials that conform to ASME B16.34-2013 Standard Class pressure-temperature ratings are listed in
tables 2 and 3. These ratings apply to all Fisher cast, forged, and fabricated steel valves.
Table 2. For ASME Standard CL150 Valves
(1)
SERVICE
TEMP (_F)
WORKING PRESSURE (PSIG)
LCC LF2 WCC
WC6
(2)
WC9
(2)
C12A
(2)
CF8
(2,3)
or
304
(2,3)
CF8M
(2,3)
or
316
(2,3)
CF3M 316L CG8M
317
(2,3)
CF8C
(2,3)
347
CK3MCuN
CD3MN
CD3MWCuN
-20 to 100
200
300
400
500
290
260
230
200
170
285
260
230
200
170
290
260
230
200
170
290
260
230
200
170
290
260
230
200
170
290
260
230
200
170
275
230
205
190
170
275
235
215
195
170
275
235
215
195
170
230
195
175
160
150
275
235
215
195
170
275
235
215
195
170
275
255
230
200
170
275
255
230
200
170
290
260
230
200
170
600
650
700
750
800
140
125
---
---
---
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
110
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
80
140
125
110
95
---
850
900
950
1000
1050
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
65
50
35
20
20
65
50
35
20
20
65
50
35
20
20
65
50
35
20
20
65
50
35
20
20
65
---
---
---
---
65
---
---
---
---
65
50
35
20
---
65
50
35
20
20
65
50
35
20
20
65
50
35
20
---
---
---
---
---
---
1100
1150
1200
1250
1300
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
20
---
---
---
---
20
---
---
---
---
20
20
20
---
---
20
20
20
20
20
20
20
20
20
20
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
20
20
20
20
20
20
20
20
20
20
---
---
---
---
---
---
---
---
---
---
1350
1400
1450
1500
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
20
20
20
15
20
20
20
15
---
---
---
---
---
---
---
---
---
---
---
---
20
20
20
15
20
15
10
10
---
---
---
---
---
---
---
---
1. Table information is extracted from the Valve–Flanged, Threaded, and Welding End, ASME Standard B16.34-2013. These tables must be used in accordance with the ASME s tandard. The
user is advised that a valve used under the jurisdiction of the ASME Boiler and Pressure Vessel Code, ASME Code for Pressure Piping, or governmental regulations is subject to any limitation of
that code or regulation. This includes any maximum temperature limitation for a material or rule governing the use of a material at a low temperature.” Information copied with permission of
the publisher; The American Society of Mechanical Engineers, 345 East 47th Street, New York, New York, 10017.
2. Flanged end ratings terminate at 1000_F.
3. At temperatures over 1000_F, use material only when carbo n content is 0.04% or higher.