Data Sheet

ED Valve
D100017X012
Product Bulletin
51.1:ED
December 2012
21
Figure 12. Typical Trim Used for NACE MR0175 / ISO 15156 and NACE MR0103. Environmental restrictions may apply
Notes:
Do not exceed the maximum pressure and temperature for the pressure rating of the valve material used, even though the trim shown may have higher capabilities.
Use trim 87 instead of trim 85 for nonlubricating fluids such as superheated steam or dry gases between 149 and 316_C (300 and 600_F).
1
2
600-100
1600
1400
650
0
600
0
600
0
- 200 0 200 400
100
80
60
40
20
200
800
1000
1200
-400
- 325
400
800 1200
400
FLUID TEMPERATURE, _F
FLUID TEMPERATURE, _C
FOR STANDARD METAL SEATING WITH
CL600 WCC OR LCC VALVE BODY
FOR STANDARD METAL SEATING WITH CL600
316 STAINLESS STEEL (CF8M) VALVE BODY
1
PRESSURE DROP, PSI
PRESSURE DROP, BAR
110
1600
-100
1400
300
0
0
600
0
100
80
60
40
20
200
800
1000
1200
- 200 200 400
400
FLUID TEMPERATURE, _F
PRESSURE DROP, PSI
PRESSURE DROP, BAR
110
- 100 0 100 200
FLUID TEMPERATURE, _C
300 400
-50
100 500 700
1
C0575-2
2
85
2
85
87
86
86
87