Instruction Manual

Instruction Manual
D103553X012
Large ET and ED Valves
September 2014
25
Table 6. Approximate Weights
END
CONNECTION
APPROXIMATE
WEIGHT
Size, NPS Type
(1)
kg lb
12
RF
1410 3100
RTJ
BW 1220 2700
14
RF
1565 3450
RTJ
BW 1340 2950
16
RF
1720 3800
RTJ
BW 1450 3200
30 CL300 RF 6690 14750
30 CL600 RF 13600 30000
(2)
1. RF–raised face; RTJ–ring-type joint; BW–buttwelding.
2. NPS 30 CL600 estimated.
Parts List
Note
Part numbers are shown for recommended spares only. For part
numbers not shown, contact your Emerson Process Management sales
office.
Valve Body
Key Description Part Number
1ValveBody
2* Valve Plug
3* Cage
6* Seat Ring Seal (ET valve only)
7* Valve Plug Stem
Key Description Part Number
8* Pin
9* Seat Ring
10* Bonnet Gasket
11* Cage Gasket
13* Seat Ring Gasket (ED valve only)
15 Stud
16 Hex Nut
17 Drain Plug, optional
27 Retaining Ring (ET valve only)
28 Seal Ring (ET valve only)
28* Piston Ring (2 req'd) (ED valve only)
29 Backup Ring (ET valve only)
49* Cap Screw (ED valve only)
219* PEEK Anti-extrusion ring (ET HTS1 option valve only)
Bonnet
1 Valve Bonnet
3 Packing Box Flange
4 Packing Flange Stud (2 req'd)
5 Packing Flange Nut (2 req'd)
PTFE V-Ring Packing
6* Packing Set, PTFE (1 req'd) for single
packing; 2 req'd for double packing) 1R290801012
8 Spring, stainless steel (single packing
only) 1D387437012
8 Lantern Ring, stainless steel (double
packing only) 0W087135072
10 Special Washer, stainless steel (single
packing only) 1H995936042
PTFE/Composition Packing
7* Packing Ring, PTFE/composition (8 req'd) 1D7520X0012
8 Lantern Ring, stainless steel 0W087135072
Graphite Ribbon/Filament Packing
7* Packing Ring, Graphite Ribbon (2 r eq'd for
single packing; 3 req'd for double
packing) 1V5666X0022
7* Packing Ring, Graphite Filament (3 req'd
for single packing; 3 req'd for double
packing) 1D7520X0162
8 Lantern Ring, stainless steel (2 req'd
for single packing; 1 req'd for double
packing) 0W087135072
11 Packing Box Ring
12* Upper Wiper, Felt (PTFE packings only) 1J873006332
13 Packing Follower
14 Pipe Plug
25 Cap Screw (8 req'd)
26 Hex Nut (8 req'd)
*Recommended spare parts