Quick Start Guide

Quick Start Guide
D103470X012
DLC3020f Digital Level Controller
July 2012
47
Table 12. Cageless Displacer Sensors
(1)
Mounting Sensor
Standard Head
(2)
,
Wafer Body
(6)
and
Torque Tube Arm
Material
Flange Connection (Size) Pressure Rating
(3)
Mounts on
top of vessel
249BP
(4)
Steel
NPS 4 raised face or optional ring‐type joint CL150, CL300, or CL600
NPS 6 or 8 raised face CL150 or CL300
249CP 316 Stainless Steel NPS 3 raised face CL150, CL300, or CL600
249P
(5)
Steel or stainless steel
NPS 4 raised face or optional ring‐type joint
CL900 or 1CL500
(EN PN 10 to DIN PN 250)
NPS 6 or 8 raised face
CL150, CL300, CL600, CL900,
CL1500, or CL2500
Mounts on
side of vessel
249VS LCC, WCC (steel), CF8M
For NPS 4 raised face or flat face
CL125, 150, 250, 300, 600, 900,
or 1500 (EN PN 10 to DIN PN 160)
For NPS 4 butt weld end, XXS CL2500
Mounts on top of
vessel or on
customer supplied
cage
249W
WCC (steel) or CF8M For NPS 3 raised face CL150, CL300, or CL600
LCC (steel) or CF8M For NPS 4 raised face CL150, CL300, or CL600
1. Standard displacer lengths are 14, 32, 48, 60, 72, 84, 96, 108, and 120 inches.
2. Not used with side‐mounted sensors.
3. EN flange connections available in EMA (Europe, Middle East and Africa).
4. Not available in EMA.
5. 249P available in Europe only.
6. Wafer Body only applicable to the 249W.