Quick Start Guide

Quick Start Guide
D103470X012
DLC3020f Digital Level Controller
July 2012
21
Sensor Units
Select the appropriate sensor units for your application.
Note
Default units from factory are SI (Metric).
If you choose Mixed Units you must select the units for each sensor parameter.
Figure 12. Typical Sensor Nameplate
DISPLACER
PRESSURE RATING
1500 PSI
103 CU‐IN
316 SST
249B
76543210
PSI
2 x 32 INCHES
4 3/4 LBS
K MONEL/STD
285/100 F
WCB STL
MONEL
DISPLACER
MATERIAL
DISPLACER
VOLUME
DISPLACER SIZE
(DIAMETER X LENGTH)
TORQUE TUBE MATERIAL
SENSOR TYPE
DISPLACER
WEIGHT
ASSEMBLY
PRESSURE RATING
ASSEMBLY MATERIAL
TRIM MATERIAL
23A1725‐E sht 1
E0366
Unit System—English Units, Metric/SI Units, Mixed Units
Length Units—mm, cm, m, in, or ft
Volume Units—mm
3
, ml, L, in
3
Weight Units—oz, lb, g, or kg
Temperature Units—_F, _R, _C, or K
Torque Rate Units—NSm/deg, dyneScm/deg, lbfSin/deg
Fluid Density Units—degAPI, SGU (Specific Gravity) lb/in
3
, lb/ft
3
, lb/gal, degBaum hv, degBaum lt, kg/m
3
, g/cm
3
, kg/L,
g/ml, or g/L
Sensor Parameters
Enter the sensor parameters. Selections shown in the drop down are based on the sensor units chosen.
Displacer Length
Displacer Volume
Displacer Weight
Driver Rod Length
Instrument Mount Position