Instruction Manual

Instruction Manual
D103434X012
Blocks
November 2014
81
Table B‐5. Analog Input Block Parameter Definitions (Continued)
DescriptionInitial ValueRange
Write Block
Mode
RO /
RW
Index
Number
Label
PARAMETER_NAME
Updated Event
UPDATE_EVT
20
Data Type: DS‐73
This alarm is generated whenever a static parameter
is changed.
UNACKNOWLEDGED 20.1 RW NA
0=Undefined
1
=Acknowledged
2
=Unacknowledged
0=Undefined
UPDATE_STATE 20.2 RO NA
0=Undefined
1
=Update reported
2
=Update not reported
0=Undefined
TIME_STAMP 20.3 RO NA 0
STATIC_REVISION 20.4 RO NA 0
RELATIVE_INDEX 20.5 RO NA 0
Block Alarm
BLOCK_ALM
21
Data Type: DS‐72
The block alarm is used for all configuration,
hardware, connection failure or system problems in
the block. The cause of the alert is entered in the
subcode field.
UNACKNOWLEDGED 21.1 RW
0=Undefined
1
=Acknowledged
2
=Unacknowledged
ALARM_STATE 21.2 RO
0=Undefined
1
=Clear‐reported
2
=Clear‐not reported
3
=Active‐reported
4
=Active‐not reported
TIME_STAMP 21.3 RO
SUBCODE 21.4 RO
VALUE 21.5 RO
Alarm Summary
ALARM_SUM
22
Data Type: DS‐74 Current alert status,
unacknowledged states, unreported states, and
disabled states of the alarms associated with the
function block.
0=clear
0=acknowledged
0=reported
0=enabled
CURRENT 22.1 RO ALL
0: Discrete alarm
1: Hi Hi alarm
2: Hi Alarm
3: Lo Lo Alarm
4: Lo Alarm
7: Block alarm
 UNACKNOWLEDGED 22.2 RO ALL
UNREPORTED 22.3 RO ALL
DISABLED 22.4 RW ALL All bits: 0
Acknowledge Option
ACK_OPTION
23 ALL
0: Discrete alarm
1: Hi Hi alarm
2: Hi Alarm
3: Lo Lo Alarm
4: Lo Alarm
7: Block alarm
All bits: 0
Data Type: Bit String
0
=Disable
1
=Enable
Selection of whether alarms associated with the
block will be automatically acknowledged.
Alarm Hysteresis
ALARM_HYS
24 ALL 0 ‐ 50% 0.50%
Data Type: Float
Hysteresis on alarms.
High High Priority
HI_HI_PRI
25 ALL 0 to 15 0
Data Type: Unsigned8
The priority of the hi hi alarm.
High High Limit
HI_HI_LIM
26 ALL OUT_SCALE 0
Data Type: Float
Value of analog input which will generate an alarm.
High Priority
HI_PRI
27 ALL 0 to 15 0
Data Type: Unsigned8
The priority of the high alarm.
Hi Limit
HI_LIM
28 ALL OUT_SCALE 0
Data Type: Float
Value of analog input which will generate an alarm.
Low Priority
LO_PRI
29 ALL 0 to 15 0
Data Type: Unsigned8
The priority of the low alarm.
Low Limit
LO_LIM
30 ALL OUT_SCALE 0
Data Type: Float
Value of analog input which will generate an alarm.
Low Low Priority
LO_LO_PRI
31 ALL 0 to 15 0
Data Type: Unsigned8
The priority of the low low alarm.
Low Low Limit
LO_LO_LIM
32 ALL OUT_SCALE 0
Data Type: Float
Value of analog input which will generate an alarm.
-Continued-