Instruction Manual

Instruction Manual
D103434X012
Service Tools
November 2014
45
Section 6 Service Tools6‐6‐
Service Tools
Alerts
AMS Device Manager Service Tools > Alerts
Field Communicator Service Tools > Alerts
Active alerts are displayed on the Active Alerts tab (figure 6‐1).
Figure 6‐1. Service Tools > Alerts
ACTIVE ALERTS TAB
SERVICE TOOLS
ALERTS
Alert Conditions
The alert conditions for each group of alerts are listed below. If there are no alerts active for a particular group the
group will not be displayed in Alerts.
Electronics
D Pending Memory Fail— active if a memory error has been detected in the main board.
D Static Memory Fail— active if a memory error has been detected in the main board.
Operational
D PV Exceeds Sensor Range— active if the Primary Variable (PV) has reached or exceeded the Sensor Range and is no
longer correct.