Instruction Manual

Instruction Manual
D103434X012
Configuration
November 2014
35
Figure 4‐9. Configure > Manual Setup > Options
MANUAL
SETUP
OPTIONS TAB
MODE
WRITE ALARM
CONFIGURE
RESOURCE BLOCK
TRANSDUCER BLOCK
ALERT KEY
MAXIMUM ALERTS ALLOWED
MAXIMUM ALERTS POSSIBLE
FEATURES SELECTED
BOCK ALARM
WRITE LOCK
CONFIRM TIME
COMMUNICATION TIMEOUT
FUNCTION BLOCK
AVAILABLE
Write Alarm
The Write Alarm (WRITE_ALM [40]) is used to alert when parameters are writable to the device.
Write Alarm Disabled—select to disable the Write Alarm
Alarm State—indicates the state of the Write Alarm. Five states are possible; Undefined, Clear‐Reported, Clear-Not
Reported, Active‐Reported, Active‐Not Reported.
Unacknowledged—select Undefined, Acknowledged, or Unacknowledged
Block Alarm
The block alarm is used for all configuration, hardware, connection failure, or system problems in the block. Alarm
Summary (ALARM_SUM [37]) determines if the Write Alarm and Block Alarm are disabled.
Block Alarm Disabled—select to disable the Block Alarm
Alarm State—indicates the state of the Block Alarm. Five states are possible; Undefined, Clear‐Reported, Clear-Not
Reported, Active‐Reported, Active‐Not Reported.
Unacknowledged—select Undefined, Acknowledged, or Unacknowledged
Write Lock
Write Lock determines if writes are permissible to other device parameters.