Instruction Manual

Instruction Manual
D103434X012
Configuration
November 2014
27
Device
Select the Device tab (figure 4‐3) to access Variable Configuration, Sensor Limits, Sensor Hardware Information, Sensor
Units, Mode, Sensor Parameters, Instrument Mount Position, and Torque Tube.
Figure 4‐3. Configure > Manual Setup > Device
CONFIGURE
MANUAL SETUP
DEVICE TAB
SELECT UNIT SYSTEM
SENSOR PARAMETERS
VARIABLE
CONFIGURATION
SENSOR LIMITS
INSTRUMENT
MOUNT POSITION
TORQUE TUBE
SENSOR
HARDWARE
INFORMATION
Variable Configuration
Type of Measurement— Level or Interface
Primary Value Range High— defines the maximum operational end point for reported PV.
Primary Value Range Low— defines the minimum operational end point for reported PV. Default is above zero.
Primary Value Offset— the constant offset applied to the level/interface measurement.
Primary Value Range Units— units for PV, PV Range, and Sensor Limits.
Sensor Limits
Upper Sensor Limit— Indicates the maximum usable value for the Primary Value Range High.
Lower Sensor Limit— Indicates the minimum usable value for the Primary Value Range Low.