Instruction Manual
Instruction Manual
D103434X012
Configuration
November 2014
26
Figure 4‐2. Guided Setup
GUIDED SETUP
INSTRUMENT SETUP
CONFIGURE
Manual Setup
AMS Device Manager Configure > Manual Setup
Field Communicator Configure > Manual Setup
The Device, Process Fluid, Instrument Display, Snap Acting Control, and Options tabs are accessible through Manual Setup.
Note
An error will be generated if the instrument is put back in service without applying device configuration changes; you must apply
changes before putting the instrument back In Service. To clear an error, set the Mode to Out of Service, select Apply, then put
back In Service.