Instruction Manual

Instruction Manual
D103434X012
Blocks
November 2014
171
Note
Because individual views are limited in size, View List 4 has
four parts.
Table B‐58. Primary Transducer Block, View 4.1
Index Number Parameter
1 ST_REV
3 STRATEGY
4 ALERT_KEY
10 TRANSDUCER_TYPE
18 SENSOR_SN
19 SENSOR_CAL_METHOD
20 SENSOR_CAL_LOC
21 SENSOR_CAL_DATE
22 SENSOR_CAL_WHO
Table B‐59. Primary Transducer Block, View 4.2
Index Number Parameter
1 ST_REV
15.1 PRIMARY_VALUE_RANGE.EU_100
15.2 PRIMARY_VALUE_RANGE.EU_0
15.3 PRIMARY_VALUE_RANGE.ENG_UNITS
15.4 PRIMARY_VALUE_RANGE.DECIMAL
16 SENSOR_TYPE
24.1 SENSOR_INFO.SENSR_TYPE
24.2 SENSOR_INFO.END_CONNECTION_STYLE
24.3 SENSOR_INFO.TT_WALL
24.4 SENSOR_INFO.PRESSURE_RATING
24.5 SENSOR_INFO.END_CONNECTION_TYPE
24.6 SENSOR_INFO.DISPLACER_SIZE
24.7 SENSOR_INFO.DISPLACER_MTL
24.8 SENSOR_INFO.DISPLACER_RATING
24.9 SENSOR_INFO.G_DIMEN
24.10 SENSOR_INFO.BODY_MTL
24.11 SENSOR_INFO.MECHANICAL_SENSOR_SN
24.12 SENSOR_INFO.HEAT_INSULATOR
24.13 SENSOR_INFO.TT_MATERIAL
25.1 DLC_UNITS.UNIT_SYSTEM
25.2 DLC_UNITS.LENGTH_UNITS
25.3 DLC_UNITS.VOLUME_UNITS
25.4 DLC_UNITS.WEIGHT_UNITS
25.5 DLC_UNITS.TEMPERATURE_UNITS
25.6 DLC_UNITS.DENSITY_UNITS
25.7 DLC_UNITS.TORQUE_RATE_UNITS
25.8 DLC_UNITS.PRESSURE_UNITS
26.1 DLC_SENSOR_PARAM.DISPLACER_LENGTH
26.2 DLC_SENSOR_PARAM.DISPLACER_VOLUME
26.3 DLC_SENSOR_PARAM.DISPLACER_WEIGHT
26.4 DLC_SENSOR_PARAM.DRIVER_ROD_LENGTH
24 MOUNT_POSITION
Table B‐60. Primary Transducer Block, View 4.3
Index Number Parameter
1 ST_REV
29 PV_OFFSET
30 TEMP_COMP_SELECT
32 TORQUE_TUBE_MTL
42 SNAP_ACTING_CTRL
43 SNAP_UNITS
44 DI_1_TRIP_PT
45 DI_1_DEADBAND
46 DI_1_ACTION
48 DI_2_TRIP_PT
49 DI_2_DEADBAND
50 DI_2_ACTION
52 SENSOR_MAJOR_REV
53 SENSOR_MINOR_REV
54 INSTRUMENT_SN
55 SENSOR_ELECT_ID
58 FAILED_PRI
59 FAILED_ENABLE
60 FAILED_MASK
63 MAINT_PRI
64 MAINT_ENABLE
65 MAINT_MASK
68 ADVISE_PRI
69 ADVISE_ENABLE
70 ADVISE_MASK
75 RAPID_RATE_LIMIT
76 PRESSURE_SELECT
78 GAS_MOL_WGT
Table B‐61. Primary Transducer Block, View 4.4
Index Number Parameter
1 ST_REV
35.1 UPPER_FLUID_TYPE.TYPE
35.2 UPPER_FLUID_TYPE.BASE_DENSITY
35.3 UPPER_FLUID_TYPE.CUSTOM_NAME
38.1 LOWER_FLUID_TYPE.TYPE
38.2 LOWER_FLUID_TYPE.BASE_DENSITY
38.3 LOWER_FLUID_TYPE.CUSTOM_NAME