Instruction Manual

Instruction Manual
D103434X012
Blocks
November 2014
164
Table B‐54. Primary Transducer Block Parameter Definitions (Continued)
DescriptionInitial ValueRangeMode
RO /
RW
Index
Number
Label
PARAMETER_NAME

STATUS
36.1 RO NA NA NA
Data Type: Uint8
Status of upper fluid density value
VALUE
36.2 RO NA NA NA
Data Type: Float
Upper fluid density value
UPPER_TBL
37
Data Type: DS‐257
Density correction table for upper fluid. *When
UPPER_FLUID_ TYPE.TYPE is set to custom, this
parameter becomes RW.
COMP_TEMP_1
37.1 *RW OOS 146 to 699 K 0
Data Type: Float
UPPER_DENSITY_1
37.2 *RW OOS > = 0 0
COMP_TEMP_2
37.3 *RW OOS 146 to 699 K 0
UPPER_DENSITY_2
37.4 *RW OOS > = 0 0
COMP_TEMP_3
37.5 *RW OOS 146 to 699 K 0
UPPER_DENSITY_3
37.6 *RW OOS > = 0 0
COMP_TEMP_4
37.7 *RW OOS 146 to 699 K 0
UPPER_DENSITY_4
37.8 *RW OOS > = 0 0
COMP_TEMP_5
37.9 *RW OOS 146 to 699 K 0
UPPER_DENSITY_5
37.10 *RW OOS > = 0 0
COMP_TEMP_6
37.11 *RW OOS 146 to 699 K 0
UPPER_DENSITY_6
37.12 *RW OOS > = 0 0
COMP_TEMP_7
37.13 *RW OOS 146 to 699 K 0
UPPER_DENSITY_7
37.14 *RW OOS > = 0 0
COMP_TEMP_8
37.15 *RW OOS 146 to 699 K 0
UPPER_DENSITY_8
37.16 *RW OOS > = 0 0
COMP_TEMP_9
37.17 *RW OOS 146 to 699 K 0
UPPER_DENSITY_9
37.18 *RW OOS > = 0 0
COMP_TEMP_10
37.19 *RW OOS 146 to 699 K 0
UPPER_DENSITY_10
37.20 *RW OOS > = 0 0
Lower Fluid Type
LOWER_FLUID_TYPE
38
TYPE
38.1 RW OOS > 0 1
Data Type: Enum (2)
Enumeration for the type of lower fluid.
BASE_DENSITY
38.2 *RW OOS > 0 1
Base density of fluid at room temperature. If
type is custom, then non temperature
compensated value is entered and saved here.
Writable but the device will adjust to the closest
value it can on write when it's not a custom base
density being entered.
CUSTOM_NAME
38.3 *RW OOS NULL
Name of the custom fluid entered. If type is not
custom, then nothing will be shown on a read.
Writable if type fluid is set to custom.
-Continued-