Instruction Manual

Instruction Manual
D103434X012
Blocks
November 2014
162
Table B‐54. Primary Transducer Block Parameter Definitions (Continued)
DescriptionInitial ValueRangeMode
RO /
RW
Index
Number
Label
PARAMETER_NAME
Mounting Position
MOUNT_POSITION
27 RW OOS
1: Left of Displacer
2: Right of Displacer
2: Right of
Displacer
Data Type: Enum (1)
Selects on which side of the displacer the
DLC3020f is mounted
PV_PERCENT
28
Data Type: DS‐65
Primary value in terms of percent base on PV
range
STATUS
28.1 RO NA NA NA
Data Type: Uint8
Primary Value status
VALUE
28.2 RO NA NA NA
Data Type: Float
0% = PRIMARY_VALUE_RANGE. LOWER, 100% =
PRIMARY_
VALUE_RANGE.UPPER
PV_OFFSET
29 RW OOS NA 0
Data Type: Float
The zero reference for the output of the PV
calculation, referred to the location of the
bottom of the displacer at zero differential
buoyancy condition. Units are in
PRIMARY_VALUE_RANGE.UNITS
TEMP_COMP_SELECT
30 RW OOS
0: None
1: Manual
2: AO Block
3: RTD
0: None
Data Type: Enum (1)
The input selection of temperature source for
temperature compensation
COMP_TEMPERATURE
31
Data Type: DS‐65
A user inputted process temperature. It can be
used for temperature compensation instead of
temperature compensation from the AO block
or RTD or Manual
STATUS
31.1 RO NA NA NA Data Type: Uint8
VALUE
31.2 *RW OOS ‐127 to 426_C
Data Type: Float
*RW when TEMP_COMP_SELECT is set to
Manual otherwise RO
Torque Tube Material
TORQUE_TUBE_MTL
32 RW OOS
0: Other
1: Nickel N02202
2: Dura Nickel N03301
3: Monel N04400
4: Kmonel N05500
5: Inconel N06600
6: Alloy N08020
7: Incoloy N0880
8: Hasteloy C‐N10276
9: Hasteloy B2‐N10665
10: 304 SST‐S30400
11: 304L SST‐S30403
12: 316 SST‐31600
13: 316L SST‐1603
14: 321 SST‐S32100
15: 347 SST‐S34700
255: Unknown
4: Kmonel
Data Type: Enum (1)
Selected torque tube material for torque tube
temperature compensation. 0xff ‐ Custom
option lets user adjust TORQUE_TUBE_ TABLE
for custom torque rates.
Torque Tube Table
TORQUE_TUBE_TBL
33 OOS
Data Tu[e” DS‐256
Torque tube correction table being used.
COMP_TEMP_1
33.1 *RW OOS 146 to 699 K 255.372K
Data Type: Float
*Parameter is RW only when
TORQUE_TUBE_MATERIAL is set to custom.
COMP_GAIN_1
33.2 *RW OOS > = 0, < 2 1.0024
COMP_TEMP_2
33.3 *RW OOS 146 to 699 K 294.261K
-Continued-