Instruction Manual

Instruction Manual
D103434X012
Blocks
November 2014
123
Table B‐27. Analog Output Function Block Parameter Definitions (Continued)
DescriptionInitial ValueRange
Block
Mode
RO /
RW
Index
Number
Label
PARAMETER_NAME
Update Event
UPDATE_EVT
29
Data Type: DS‐73
This alert is generated by any changes to static data.
UNACKNOWLEDGED 29.1 RW NA
0:Undefined
1:Acknowledged
2:
Unacknowledged
0: Undefined
UPDATE_STATUS 29.2 RO NA
0:Undefined
1:Update reported
2:Update not reported
0: Undefined
Data Type: DS‐73
This alert is generated by any changes to static data.
TIME_STAMP 29.3 RO NA 0
STATIC_REVISION 29.4 RO NA 0
RELATIVE_INDEX 29.5 RO NA 0
Block Alarm
BLOCK_ALM
30
Data Type: DS‐72
The block alarm is used for all configuration,
hardware, connection failure, or system problems
in the block.
UNACKNOWLEDGED 30.1 RW NA
0:Undefined
1:Acknowledged
2:
Unacknowledged
0: Undefined
ALARM_STATE 30.2 RO NA
0:Undefined
1:Clear reported
2:Clear not reported
3:Active reported
4:Active not reported
0: Undefined
TIME_STAMP 30.3 RO NA 0
SUBCODE 30.4 RO NA 0
VALUE 30.5 RO NA 0
Extended Parameters
StdDev
STDDEV
31 RO NA positive float Dynamic
Data Type: Float
Standard Deviation.
Cap StdDev
CAP_STDDEV
32 RO NA positive float Dynamic
Data Type: Float
Capability Standard Deviation.