Manualshelf

Instruction Manual

ManualsBrandsEmerson ManualsValve InstrumentationEmerson Fisher DLC3010 HART Digital Level Controller
31323334353637383940
Instruction Manual
D102748X012
Overview
October 2014
31
Alarm Type and Security
Alarm Type
D Alarm Jumper— displays the position of the hardware alarm jumper, either high current or low current.
D Display Alert/Saturation Level
Security
D Write Lock
D Write Lock Setup
To setup and calibrate the instrument, write lock must be set to Writes Enabled. (Write Lock is reset by a power cycle. If
you have just powered up the instrument Writes will be enabled by default.) In AMS, go to Device Information in the
Overview page. Select the Alarms tab to change the write lock.