Instruction Manual

Instruction Manual
D102803X012
249W Sensor
December 2012
20
Key Description Part Number
12* Arm Gasket
Graphite/SST 1E5629X0072
N04400/PTFE 10B6639X012
13* Tube End Gasket
(1)
Graphite/SST 0Y0876X0052
N04400/PTFE 13B8741X012
14 Retaining Flange
For SA‐193 B7 and B7M bolting
For SA‐193 B8M bolting
15 Positioning Plate, zn pl steel
16 Groove Pin, plated steel
17 Stud Bolt
(1)
(4 req'd)
For SA‐193 B7 bolting
For SA‐193 B7M bolting
For SA‐193 B8M bolting
18 Hex Nut
(1)
(4 req'd)
For SA‐193 B7 bolting
For SA‐193 B7M bolting
For SA‐193 B8M bolting
Key Description
19 Bolt Stud
(1)
(4 req'd)
NPS 3 Wafer Body
For SA‐193 B7 bolting
For SA‐193 B7M bolting
For SA‐193 B8M bolting
NPS 4 Wafer Body
For SA‐193 B7 bolting
For SA‐193 B7M bolting
For SA‐193 B8M bolting
20 Hex Nut
(1)
NPS 3 Wafer Body (8 req'd)
NPS 4 Wafer Body (4 req'd)
For SA‐193 B7 bolting
For SA‐193 B7M bolting
For SA‐193 B8M bolting
21 Nameplate
22 Drive Screw
23 B31‐3 Nameplate (not shown)
24 NACE Tag (not shown)
25 Wire (not shown)
*Recommended spare parts
1. This part is available in a wide variety of materials of construction, part dimensions,
or other specifications. Listed here are standard or typical materials, dimensions, or
specifications. Contact your Emerson Process Management sales office for assistance
in selection of specific materials, dimensions, or specifications.
Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
E 2001, 2012 Fisher Controls International LLC. All rights reserved.
Fisher and FIELDVUE are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co. Emerson Process
Management, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective
owners.
Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.