Data Sheet

ManualsBrandsEmerson ManualsControl ValvesEmerson Fisher D & DA

www.Fisher.com

Fisherr D and DA Control Valves

Fisher D and DA single-port, high-pressure valves are

widely used in oil and gas production industries. These

valves are especially useful for either throttling or

on/off control of liquids or gases which are gritty,

sticky, or which have a tendency to build up on internal

valve parts. The DA valve is also useful in angle piping

or other applications where a self-draining valve is

desired.

Unless otherwise noted, all NACE references are to

NACE MR0175-2002.

Features

 Heavy-Duty Construction–Massive guiding (figure

1) positively aligns the valve plug in the seat ring for

high pressure drop applications. The screwed-in

seat ring completely encloses the seat ring gasket.

 Easy Maintenance–Screwed bonnet/body joint

allows repair or maintenance with a minimum of

tools.

 Severe Service Capability–Valve is available with

VTC (ceramic) trim for service in very erosive

applications. T he valve plug is also available with a

tungsten carbide tip and the seat ring can be fitted

with a full-bore tungsten carbide insert for erosive

service.

 Meets Variety of Specifications–Valve body and end

connection constructions are available for API as

well as ASME standards.

W7859-1

Fisher D Valve with 657 Actuator

 NACE Trim Standard–NACE trim and bolting

materials are standard for all applications. These

materials comply with the requirements of NACE

MR0175-2002.

DandDAValves

D100039X012

Product Bulletin

51.2:D

March 2014

Summary of content (8 pages)

PAGE 1
Product Bulletin D and DA Valves 51.2:D March 2014 D100039X012 Fisherr D and DA Control Valves Fisher D and DA single-port, high-pressure valves are widely used in oil and gas production industries. These valves are especially useful for either throttling or on/off control of liquids or gases which are gritty, sticky, or which have a tendency to build up on internal valve parts. The DA valve is also useful in angle piping or other applications where a self-draining valve is desired.
PAGE 2
Product Bulletin D and DA Valves 51.
PAGE 3
Product Bulletin D and DA Valves 51.2:D March 2014 D100039X012 Table 1. Valve Sizes, Port Diameters, and End Connections SCREWED VALVE BODIES VALVE SIZE, NPS PORT DIAMETER (INCHES) 1 2 FLANGED VALVE BODIES ASME API CL150 through CL600 CL900 and CL1500 CL2500 10,000 lb. Spec A and C 3600 psi 6000 psi 9000 psi (WCC Steel DA Only) 10,000 psi (Except WCC Steel DA) 0.25, 0.375, 0.5, 0.75 X(1) X --- --- X X X --- 0.25, 0.375, 0.5, 0.75, 1, 1.25 X X X X X X X X 1.
PAGE 4
Product Bulletin D and DA Valves 51.2:D March 2014 D100039X012 Table 5. Flow Coefficient (Cv at Maximum Valve Plug Travel) VALVE SIZE, NPS PORT DIAMETER, mm (INCHES) EQUAL PERCENTAGE D EQUAL PERCENTAGE DA Flow Up Flow Down 6.4 (0.25) 9.5 (0.375) 12.7 (0.5) 19.1 (0.75) 6.4 (0.25) 9.5 (0.375) 12.7 (0.5) 19.1 (0.75) 25.4 (1) 31.8 (1.25) 1.66 4.03 6.51 12.3 1.66 4.03 6.82 14.1 23.7 34.5 3.21 7.06 11.2 16.8 3.21 7.06 12.1 21.2 31.8 44.9 1 2 Table 6.
PAGE 5
Product Bulletin D and DA Valves 51.2:D March 2014 D100039X012 Installation Valve orientation of the D and DA does not affect operation, but to facilitate changing trim parts, the valve stem should be vertical with the actuator above the valve. Proper flow direction is indicated by the arrow on the valve. Dimensions are shown in figures 2 and 3. 6. Pressure drops a. Range of flowing pressure drops b. Maximum at shutoff 7. Flow rates a. Minimum controlled flow b.
PAGE 6
Product Bulletin D and DA Valves 51.2:D March 2014 D100039X012 Table 7. Fisher D Dimensions ASME CL300 CL150 FLANGED VALVE SIZE, NPS D--All Ratings CL600 A A Stem Size A-Raised Face G Raised Face Ring-Type Joint G Raised Face Ring-Type Joint 1 206 46 219 232 46 232 2 267 70 267 --- 70 286 G 9.5 (3/8) 12.7 (1/2) 19.1 (3/4) 232 46 173 192 179 289 70 --- 217 213 mm Inches 1 8.12 1.81 8.62 9.12 1.81 9.12 9.12 1.81 6.81 7.56 7.06 2 10.50 2.75 10.
PAGE 7
Product Bulletin D and DA Valves 51.2:D March 2014 D100039X012 Table 10. Fisher DA Dimensions A and G ASME D--All Ratings FLANGED VALVE SIZE, NPS Raised Face Ring-Type Joint Raised Face Ring-Type Joint 9.5 (3/8) 1 109 116 116 116 2 155 164 165 167 CL300 CL600 Stem Size 12.7 (1/2) 19.1 (3/4) 135 154 141 --- 164 159 mm Inches 1 4.31 4.56 4.56 4.56 5.31 6.06 5.56 2 6.12 6.44 6.50 6.56 --- 6.44 6.25 Table 11.
PAGE 8
Product Bulletin 51.2:D March 2014 D and DA Valves D100039X012 Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. Fisher is a mark owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co.