Instruction Manual

Instruction Manual
D103358X012
24000F Valves
May 2012
13
Figure 7. Spring-Loaded PTFE V-Ring Packing Kit
P/N 24494T001
E1240
Table 7. Spring-Loaded PTFE V-Ring Packing Kit
P/N 24494T001
Key No. Description Material
6* Spring ASTM A313 S30200
14 Packing Set PTFE / carbon-filled PTFE
16 Washer ASTM A240 S31600
20 Spacer J-2000 (filled PTFE)
Figure 8. Molded Graphite (Flexible Graphite)
Packing Kit P/N 24492T001
E1241
Table 8. Molded Graphite (Flexible Graphite) Packing
Kit P/N 24492T001
Key No. Description Material
13 Bushing, qty 2 Carbon - Graphite
14A
Packing Ring,
qty 3
Graphite
14B Packing Ring Graphite
Figure 9. ENVIRO-SEAL Packing Kit
P/N 24490T001
E1248
Table 9. ENVIRO-SEAL Packing Kit
P/N 24490T001
Key No. Description Material
13 Bushing, qty 2 Carbon Graphite
14 Packing Set PTFE / carbon-filled PTFE
17 Belleville Spring ASTM B637 N07718
18 Bushing PEEK
19 Washer, qty 2 Modified PTFE
Special ENVIRO-SEAL Packing
Note
The ENVIRO-SEAL PTFE packing system is suitable for
100 ppm environmental applicationsonservicesupto
51.7 barg (750 psig) and process temperatures
ranging from -46 to 232_C(-50to450_F).
For non-environmental applications, this packing
system offers excellent performance at the same
temperature range up to the maximum valve working
pressure.
Temperature limits apply to packing arrangements
only. Complete valve assembly temperature limits may
differ. Refer to appropriate pressure/ temperature
ratings.
Reference Fisher Packing Selection Guidelines for
Sliding-Stem Valves, bulletin 59.1:062, D101986X012.