Installation Instructions

Instruction Manual
D103048X012
3024C Actuator
May 2011
4
Table 3. Additional Specifications (Action Air‐to‐Open)
Size
Spring Set/
Quantity
Travel Spring Range
Effective Diaphragm Area
(1)
Maximum Output Thrust
(Maximum Actuator Stem
Force)
(2)
mm Inch Bar Psig cm
2
Inches
2
N Lb
30
217/3
218/5
218/7
16
- - -
0.5 ‐ 1.3 7 ‐ 19 170 26.4 780 170
1.4 ‐ 2.2 20 ‐ 32 170 26.4 2360 530
2.0 ‐ 3.1 29 ‐ 45 170 26.4 3360 760
30E
217/3
218/5
218/7
- - - 0.75
0.3 ‐ 1.3 4 ‐ 19 175 27.1 550 120
1.2 ‐ 2.2 17 ‐ 32 175 27.1 2180 490
1.8 ‐ 3.1 26 ‐ 45 175 27.1 3110 700
34
219/3
212/5
212/7
16 - - -
0.6 ‐ 1.4 9 ‐ 20 410 63.6 2450 550
1.1 ‐ 1.9 16 ‐ 28 410 63.6 4610 1040
1.6 ‐ 2.7 23 ‐ 39 410 63.6 6560 1480
34E
219/3
212/5
212/7
- - - 0.75
0.4 ‐ 1.4 6 ‐ 20 420 65.1 1880 420
1.0 ‐ 1.9 15 ‐ 28 420 65.1 4120 930
1.4 ‐ 2.7 20 ‐ 39 420 65.1 5870 1320
40
212/3
213/6
214/7
32 - - -
0.4 ‐ 1.3 6 ‐ 19 450 69.8 1880 420
0.8 ‐ 1.8 12 ‐ 26 450 69.8 3640 820
1.2 ‐ 2.4 17 ‐ 35 450 69.8 5530 1240
40E
212/3
213/6
214/7
- - - 1.125
0.5 ‐ 1.3 7 ‐ 19 440 68.2 2200 500
0.9 ‐ 1.8 13 ‐ 26 440 68.2 3970 890
1.3 ‐ 2.4 19 ‐ 35 440 68.2 5920 1330
213/4
214/5
214/7
- - -
1.5
0.4 ‐ 1.1 6 ‐ 16 410 63.6 1560 350
0.7 ‐ 1.6 10 ‐ 23 410 63.6 3010 680
1.0 ‐ 2.3 15 ‐ 33 410 63.6 4270 960
213/4
214/5
214/7
- - - 2
0.2 ‐ 1.2 3 ‐ 17 440 68.2 1060 240
0.5 ‐ 1.8 7 ‐ 26 440 68.2 2390 540
0.8 ‐ 2.5 12 ‐ 36 440 68.2 3400 760
45
221/8
221/12
223/12
32 - - -
0.8 ‐ 1.7 12 ‐ 25 940 146 7790 1750
1.2 ‐ 2.5 17 ‐ 36 940 146 11,700 2630
1.6 ‐ 3.2 23 ‐ 46 940 146 14,700 3300
45E
221/8
221/12
223/12
- - - 1.125
0.9 ‐ 1.7 13 ‐ 25 910 141 8350 1880
1.4 ‐ 2.5 20 ‐ 36 910 141 12,500 2810
1.7 ‐ 3.2 25 ‐ 46 910 141 15,700 3530
221/8
221/12
223/12
- - - 1.5
0.7 ‐ 1.6 10 ‐ 23 870 135 6150 1380
1.1 ‐ 2.4 16 ‐ 35 870 135 9230 2080
1.3 ‐ 3.1 19 ‐ 45 870 135 11,500 2590
221/8
221/12
223/12
- - - 2
0.5 ‐ 1.7 7 ‐ 25 940 146 4740 1070
0.8 ‐ 2.6 12 ‐ 38 940 146 7110 1600
0.9 ‐ 3.2 13 ‐ 46 940 146 8800 1980
1. Effective diaphragm area at 0% valve travel from seat.
2. Based on zero operating pressure to the diaphragm and valve travel at 0% from valve seat. This does not consider limitations such as stem buckling load. Consult your Emerson Process
Management sales office for details.
Table 4. Handwheel Specifications
ACTUATOR
SIZE
HANDWHEEL DIAMETER
TURNS PER mm/INCH
TRAVEL
RIM
FORCE
(1,2)
HANDWHEEL OUTPUT FORCE
mm In. mm In. N lb N lb
30 and
30E
200 7.87 0.24 6.1 179 40 5000 1125
34, 34E,
40, and 40E
250 9.84 0.21 5.4 286 64 10,000 2250
45 and
45E
250 9.84 0.21 5.5 400 90 14,000 3150
1. Tangential handwheel force required to produce the handwheel output force shown.
2. Brass operating nut and stainless steel screw.