Manual

Changing the SETUP menu
Digital Out
Set the digital audio output.
v
• Select a setting using • / •
buttons, then press ENTER
button.
Option window will appear.
Proceed to steps A or B.
Settings for Dolby Digital (Default'Stream) I
• Select a setting using • / • buttons, then press ENTER button.
Your setting will be activated.
PCM : Convert the Dolby Digital into PCM(2 channel).
When your amplifier/decorder is NOT compatible with Dolby Digital,
set to "PCM".
Stream : Outputs a Dolby Digital signals.
Stream ,,When your amplifier/decorder is compatible with Dolby Digital, set to
Stream .
_1 Settings for PCM (Default :Auto)
• Select a setting using • / • buttons, then • Note ....................
yoPress ENTER button.
ur setting will be activated. When playing disc with
Auto
48kHz
96kHz
Dynamic Range Control
(Default :ON)
: Select "Auto" usually.
: If your amplifier/decoder is NOT com-
patible with 96kHz PCM, select "48kHz".
96kHz sound will be output in 48kHz.
: If your amplifier/decoder is compatible
with 96kHz PCM, select"96kHz". 96kHz
sound will be output.
Set to ON to compress the range between soft and loud sounds.
copyright protection
• If you select "Auto", the
sound will be clown sam-
pled at 48kHz.
• If you select "96kHz", no
digital sound will be out-
put. Select "Auto", so
that outputting 48kHz
digital sound.
r
• Select a setting using • / •
buttons, then press ENTER
button.
Your setting will be activated.
Fast Forward with Audio (Default :OFF)
Set to ON to output the sound during playback in fast forward of x2.
r
• Select a setting using • / •
buttons, then press ENTER
button.
Your setting will be activated.
5
Press SETUP button to exit SETUP menu.