Manual

Before you start
3 4 5
1. POWER button / indicator (DVD/VCR)
Press to turn the unit on and off.
If timer programmings have been set, press to set the
unit in timer-standby mode. Press to cancel the timer
standby mode, and turn the unit on.
Lights up when power is on.
2. Cassette compartment (VCR)
Insert a tape here.
3. _ OPEN/CLOSE button (DVD)
Press to open or close the clisctray.
4. Select _il _1_ button (DVD/VCR)
Press to select the component you wish to operate.
5. Disc tray (DVD)
Place a disc when open.
6. AUDIO INPUT jacks (LINE2) (DVD/VCR)
Use to connect external equipment with standard audio cables.
7. VIDEO INPUT jack (LINE2) (DVD/VCR)
Use to connect external equipment with a standard video cable.
8. S-VIDEO INPUT jack (LINE2) (DVD only)
Use to connect the S-Video output of external equip-
ment with an S-Video cable.
9. RECORD button (DVD)
Press to start recording.
Press repeatedly to start a One-Touch Recording.
10. PLAY button (DVD)
Press to start or resume play.
11. STOP button (DVD)
Press to stop playback or recording.
Press to cancel the proceeding timer recording in DVD.
12. DVD SELECT indicator
This indicator appearswhen the DVD output mode is selected.
13. VCR SELECT indicator
This indicator appearswhen theVCR output mode is selected.
14. DUBBING button (DVD/VCR)
Press to startVCR to DVD (DVD toVCR) duplication
which you set in the SETUP menu.
15. CHANNEL • / • button (DVD/VCR)
Press to change the channel up and down.
16. Display (DVD/VCR)
Refer to "Guide to Displays on the front panel" on page 12.
17. Remote control sensor (DVD/VCR)
Receive signals from your remote control so that you
can control the unit from a distance.
18. RECORD button (VCR)
Press once to start a recording. Press repeatedly to
start a One-Touch Recording.
19. PLAY button (VCR)
Press to start playback.
20. STOP/EJECT button (VCR)
EJECTbutton-Press to remove the tape from the unit.
STOP button-Press to stop the tape motion.
Press to cancel the proceeding timer recording in VCR.
21. F.FWD button (VCR)
Press to rapidly advance the tape, or view the picture
rapidly in forward during playback. (Forward Search)
22. REW button (VCR)
Press to rewind the tape, or to view the picture rapidly
in reverse during the playback mode. (Rewind Search)
23 45 6
®
®
®
1. AC Power Cord (DVD/VCR)
Connect to a standardAC outlet to supply power to this unit.
2. S-VIDEO INPUT jack (LINE1) (DVD only)
Use to connect the S-Video output of external equip-
ment with an S-Video cable.
3. COMPONENTVIDEO OUTPUT jacks (DVD only)
Use to connect a TV monitor with component video
inputs with component video cables.
4. AUDIO INPUT jacks (LINE1) (DVD/VCR)
Use to connect external equipment with standard
audio cables.
S. AUDIO OUTPUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
equipment with standard audio cables.
6. TVANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
7. TVANTENNA OUT jack (DVD/VCR)
Use to connect an antenna cable to pass the signal
from the TV ANTENNA IN to your TV monitor.
1211 10 9 8 7
8. VIDEO OUTPUT jack (DVD/VCR)
Use to connect aTV monitor, AV receiver or other
equipment with a standard video cable.
9. VIDEO INPUT jack (LINE1) (DVD/VCR)
Use to connect external equipment with a standard
video cable.
10. S-VIDEO OUTPUT jack (DVD only)
Use to connect the S-Video input of aTV monitor, AV
receiver or other equipment with an S-Video cable.
11. AUDIO OUTPUT jacks (DVD only)
Use to connect aTV monitor, AV receiver or other
equipment with standard audio cables.
12. COAXIAL DIGITAL AUDIO OUTPUT jack
(DVD only)
Use to connect an AV receiver, Dolby Digital
decorder or other equipment with a coaxial digital
input with a digital coaxial cable.
r Note: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause perma- ]
• nent damage to the unit.
J