Manual

Recording
eeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoe
5-a
Select "VCR _ DVD" using •
/ • buttons, then press
ENTER button.
Dubbing Mode
6-a
Press SETUP button to exit
SETUP menu.
Make sure to select a recording
speed using REC SPEED button.
Press:
.............................
Press PLAY I_ button on the
unit, and then press PAUSE
button at the point you wish
to start recording.
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
8-a
Press DUBBING button on
the front of the unit.
VCR to DVD duplication will start.
eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
9-a
Press STOP • button on the
unit or STOP • button on
the remote control to stop
the recording.
4O
.oeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeo
5-b
Select "VCR _ DVD" using •
/ • buttons, then press
ENTER button.
ooeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeo
6-b
Press SETUP button to exit
SETUP menu.
Press:
Make sure to select a recording
speed using REC SPEED button.
Press:
leoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoeoo
7-b
Press PLAY I_ button on the
unit, and then press PAUSE
button at the point you wish
to start recording.
"li':'6.............................
Press DUBBING button on
the front of the unit.
DVD toVCR duplication will start.
"€)':'6.............................
Press STOP/EJECT • _ but-
ton on the unit or STOP •
button on the remote control
to stop the recording.
7-a 7-b
9-b 8-a 9-a
8-b
Note
Jeeooeeooeeooeeooeeooeeooeeooee
•When you turn off the unit
after set the Dubbing Mode
to VCR4-DVD ,the setting
will be set to VCR-I'DVD
automatically.
• Dubbing Mode is available
only if the tape or disc is not
copy protected.
• You cannot change the output
mode duringVCR to DVD or
DVD toVCR duplication.
For VCR to DVD duplication:
• The playback sound mode is
followed by the setting of
VCR playback sound mode on
page 96. Set the playback
sound mode to which you
wish to record to the DVD.