Manual

Recording

Recordin_ from an external source

Before recording from an external source, see the instruction for the connection on page 37.

1. Turn the TV and the unit on, and be sure to select the input

of the TV to which the unit is connected.

2. When you want to record to the disc: Press:

Press OPEN/CLOSE _ button to open the disc tray, then

place the disc to record properly.

When you want to record to the tape: Press:

Insert the tape with a safety tab into the cassette compart-

ment.

3. Select the input of the unit which the external equipment is

connected. (L2 or L1)

•To use the input jacks on the back of this unit, select "LI" position by

pressing [0],[0],[I] on the remote control or the CH • / • buttons.

•To use the input jacks on the front of this unit, select "L2" position

by pressing [0],[0],[2] on the remote control or the CH • / • but-

tons.

4. Select a recording speed using REC SPEED button. Refer to

"Recording speed" on page 26 for DVD or page 94 forVCR.

,_i: ABC DEF

QQQ,Q

DLSFLAy VCR DVD PAUSE

® _ ® <£>

RECION SETUP TI_ERPIOG

REC _RITOR ENTER

0 GB (ii) C_

IENU/LLST TOP IEIU RETUIN

OOC_@

CL_AI_.I_S_ZOOM SKiP SKIP

XP ---_ SP---_ LP

SEP _-- SLP _-- EP

SP __ SLP

DVD mode VCR mode

--2

-3

5. Press REC/OTR button on the unit to start recording.

6. Press PLAY button on the external source to record from.

7. For disc:

Press STOP •button on the unit to stop recording.

For tape:

Press STOP/EJECT • ___button on the unit to stop record-

ing.