Installation manual

84
Epsilon EP-B Base Drive Reference Manual
Figure 60: Watch Window - Select Parameters Window
The Select Parameters window as seen in Figure 60 allows the user to specify which parameters are to be seen in the
Watch Window. To select a parameter for the Watch Window, simple double-click on the parameter in the "Drag Source"
window or drag and drop the parameter from the "Drag Source" window on the left over to the "Parameters Displayed
in Watch Window" on the right and it will be added to the Watch Window.
Figure 61: The Watch Window
Once a parameter is added to the Watch Window, it’s current value or state is constantly monitored. If a parameter in
the window changes value or state, it will change to a red color. It will remain red until it hasn’t changed for a period of
4 seconds. After 4 seconds, the parameter will turn back to black in color. This allows the user to see what has changed
recently without looking directly at every parameter.
The following are descriptions of the buttons and controls on the Select Parameters window: