3 MEMORY CALLER ID SPEAKERPHONE MODEL EM2646 OPERATING INSTRUCTIONS * 3 Line LCD Display * 3 Languages (English, Spanish, French) * 60 Name / Number Caller ID Memory * 3 One-touch Speed Dial Memory * 10 Two-touch Speed Dial Memory * Last Number Redial * Flash / Phone Book Function * Speakerphone with Volume control * Ringer Volume control (HI / LOW / OFF) * Handset Volume control * Desk or wall mountable * Electronic Hold TO USE THE CALLER ID FEATURE OF THIS PHONE, YOU MUST SUBSCRIBE TO CALLER ID SERVICE
IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following: 1.Read and follow all instructions and warnings. 2.Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a slightly dampened cloth only. . 3.
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY, READ AND FOLLOW THESE INSTRUCTIONS. 1.Use only the following type and size of batteries: 3 size “AA” alkaline batteries (not included). 2.Do not dispose of the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions. 3.Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed. 4.
IMPORTANT TELEPHONE COMPANY& FCC INFORMATION Your telephone equipment is approved for connection to the Public Switched Telephone Network and is compliance with part 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by ACTA. 1. Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the US number and Ringer Equivalence Number (REN) for the equipment.
IMPORTANT TELEPHONE COMPANY& FCC INFORMATION FCC NOTES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesirable operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
CONNECTING YOUR TELEPHONE HANDSET WALL JACK REAR Connect the straight line cord to the jack at the REAR of the telephone and WALL JACK 5 Connect the coil cord to the jacks at the bottom of the HANDSET and side of the TELEPHONE
CHECKING THE PACKAGE CONTENTS As you unpack this set, make sure you have the following items in the package. HANDSET TELEPHONE BASE COILED HANDSET CORD WALL MOUNT ADAPTOR (attached to the back of the base for wall mounting) STRAIGHT TELEPHONE LINE CORD POWERING THE PHONE Before you connect the phone cords, follow these steps to install the batteries: 1. Insert a flat blade screwdriver or coin into the slot and pry out (lift) the battery door (FIG. 1). 2.
OPTIONS MENU To enter the Options Menu: 1. Press and hold the dial/menu button until “Options Menu” is shown in the display. 2. Use the up/down buttons to scroll through the options below, and press the dial/menu button to select the desired option you wish to set: • Set Language • Local Area Code • Set Time/Date • Set Flash Time • LED Contrast • Set Tone/Pulse • Exit Options 3. Use the up/down buttons to adjust the setting, and press the dial/menu button to confirm and set.
PAUSE FUNCTION Example: In an office where you need to dial a 9 first to get an outside line. Dial the number 9 and press the redial button, and then dial the phone number. You will see a “P” displayed for pause. You may also store this into memory. STORING PHONE NUMBERS INTO MEMORY 1. Press the store button, “Store Number” will be shown in the display. 2. Dial the phone number you want to store. 3. For (3) one-touch dialing: .
CALLER ID SYSTEM This telepphone automatically displays an incoming caller’s name and telephone number together with the date and time of the call. It records up to 60 calls and stores the data in Memory. IMPORTANT: You must subscribe to the Caller ID service from your local telephone company to utilize this feature. VIEWING THE CALLER ID LIST You can look through the data (calls) in the Caller ID list to check the numbers and names of the calls received. 1.
TROUBLESHOOTING PROBLEMS CHECK The Caller ID display does not show the caller’s information. The Caller ID unit will not function until you have subscribed to Caller ID service from your local telephone company. Call your local telephone company to have Caller ID service installed on your phone line. Check your phone line connections. Also, fresh batteries MUST be installed. Make sure all your phone line connections are secure and correct.
TROUBLESHOOTING PROBLEMS LINE REDIAL does not work. Feedback or squealing when using SPEAKERPHONE. CHECK Check if “P” shows in the display. Since the redial button has combined function (pause function), the phone may have been paused. Just press the HOOK switch. Volume is too high. Reduce the SPEAKERPHONE VOLUME control setting.
Southern Telecom TM LIMITED WARRANTY In the unlikely event that this product is defective, or does not perform properly , you may within ninety (90) days from your original date of purchase return it to the authorized service center for repair or exchange. TO OBTAIN WARRANTY SERVICE: - Provide proof of the date of purchase within the package (Dated bill of sale) - Prepay all shipping costs to the authorized service center, and remember to insure your return. - Include a return shipping address (no P.O.
