Brochures and Data Sheets

26
Data/Signal Line Protection
Features
 Automatic recovery
 Low insertion loss
 Easily installed
 Shielded case
 Miniature size
 5 year warranty
Operating Voltage 5 VDC
Clamping Voltage 90 VDC (Spark Over Voltage)
Operating Current 1A
Peak Surge Current 10 kA (8 x 20 µs)
Frequency Range 0 to 1 GHz
Insertion Loss < 0.5 dB at 500 MHz
<1.0 dB at 900 MHz
SPD Technology Gas Discharge Tube (GDT)
Connection Type BNC, 75 Ohm
Operating Temperature -40°C to +85°C
Dimensions (Inches) 0.6H x 0.6W x 2.0L
Weight 1 oz
General Technical Specifications
Edco CCTV-1
Closed Circuit TV Protection
The Edco CCTV-1 application is specifically designed for lightning protection on
closed circuit TV systems. The protector is easily installed with standard type BNC
coax connectors. The Edco CCTV-1 offers low loss even at frequencies approaching
500 Mhz. This is important for error-free data communication applications.
Edco CX Series
CCTV High Exposure
The Edco CX06-M & Edco CX06-MI Surge Protective Devices (SPDs)
implement three-stage hybrid technology. The SPDs address over-voltage
transients with a primary Gas Discharge Tube (GDT), and secondary Silicon
Avalanche Diode (SAD) components. Over-current protection, e.g. sneak
and fault currents, are mitigated with solid-state resettable fuses — PTCs.
The Edco CX06-M & Edco CX06-MI SPDs are designed in accordance with
NFPA 780 (2004 edition) requirements, with up to 20 kA of surge current
capability. The Edco CX06-MI model has an isolated ground and is
recommended for use at the camera end.
Features
 Sneak/fault current protection
 Low insertion loss
 Shielded case
 CX06-MI has an isolated ground
 5 year warranty
General Technical Specifications
Operating Voltage 5 VDC
Clamping Voltage 6 VDC
Operating Current 0.15 A
Peak Surge Current 20 kA (8 x 20 µs)
Frequency Range 0– 20 MHz
Insertion Loss < 0.1 dB at 20 MHz
SPD Technology GDT, SAD, w/Series PTC
Connection Type BNC, 50/75 Ohm
Operating Temperature -40°C to +85°C
Dimensions (Inches) M = 1.5H x 1W x 3.25L
MI = 1.5H x 1W x 4L
Weight M = 2.3 oz MI = 3 oz
Certifications UL 497B
Head End CX06-M
Camera End CX06-MI
Ordering Information