Brochures and Data Sheets

24
Data/Signal Line Protection
General Technical Specifications
Enclosure Dimensions:
Telco Board Mount
(Inches) 1.75H x 8.5W x 5.5D
(Centimeters) 4.4H x 21.6W x 14D
19" Rackmount
(Inches) 1.75H x 19W x 5.5D
(Centimeters) 4.4H x 48.3W x 14D
Primary Technology Silicon Avalanche Diode
Secondary Technology Gas Discharge Tube
Interface RJ-45 and hardwire
Features
■ Uses bipolar Silicon Avalanche Diode to
provide nondegrading protection
■ Protects against lightning surges and
internal transient activity
■ Provides unparalleled performance in a
compact, modular design
■ Offers RJ and hardwire capabilities to
provide installation flexibility
■ Enclosure can be mounted as a telco mount
(vertical or horizontal) and 19" rack mount
single or double enclosure
Edco TCS-Multi T1 Series
T1/E1 Line Protection
The Edco TCS-Multi T1 Series provides you state-of-the-art surge protection in a
scalable backplane connected solution.
The Edco TCS-Multi T1 Series features two models with different clamping
voltages, the Edco TCS-T1S-MX and the Edco TCS-T1DS-MX support in-line
connections via 4 pin headers, standard RJ-45 ports or both.
Card Performance Technical Specifications
Part Number Edco TCS-T1DS-M2
Operating Frequency Up to 55 MHz
Signal Line Voltage Up to 8 Vpk
Clamping Voltage 13 Vpk
Response Time 5 ns or less
Peak Pulse Current 10kA*
Nominal Current 4,000 Amp
Leak Capacitance 38 Picofarad
Protection Modes:
Hardwire L1-G – L3-G
L2-G – L4-G
L1-L2 – L3-L4
RJ-48C Standard (RJ-45) Pin 1-G – Pin 4-G
Pin 2-G – Pin 5-G
Pin 1-Pin 2 – Pin 4-Pin 5
Enclosure Options
Telco Board Mount
Enclosure Part Number 2000048-00 — Enclosure with backplane
and brackets, holds up to 6 cards
Comes with 4 cards installed
2000052-00 — Enclosure without cards
19" Rackmounting
Single Enclosure 2000049-00 — Mounting bracket,
holds up to 6 cards
Dual Enclosure 2000050-00 — holds up to 12 cards
Other configurations available
* Based on component specifications (8 x 20 µs)
TCS-T1S/T1DS-M2
HARD CONNECT
AND RJ