Brochures and Data Sheets

Data/Signal Line Protection
Edco FAS-1 and FAS-2 Series
One and Two Pair Signal Line Protector (Commercial)
The Edco FAS-1 and Edco FAS-2 Series are multi-stage single pair or two pair
surge suppressors designed for high exposure applications. These products were
specifically designed to meet multiple low voltage protection applications in the
fire and security industries.
Features
 Lightning protection for low voltage
 Data/signal lines
 Multi-stage protection
 Common mode and differential protection mode
 Automatic recovery

5 year warranty
Operating Voltage 15, 24, 36, 52 VDC
Clamping Voltage 18, 33, 43, 60 VDC
Operating Current 2.5 A
Peak Surge Current 10 kA (8 x 20 µs)
Frequency Range 0–10 MHz
Insertion Loss < 0.1 dB at 10 MHz
SPD Technology GDT, SAD, w/Series Inductor
Connection Type Terminal block
w/compression lugs
Terminals accept up to 12 AWG
Operating Temperature -40
°C to +85°C
Dimensions (Inches) FAS-1 = 1.5H x 1.5W x 2.8L
FAS-2 = 2H x 2W x 2.8L
Weight FAS-1 = 3.5 oz FAS-2 = 7 oz
Certifications UL 497B
12VDC use: FAS-1-018 HC (single pair)
FAS-2-018 HC (two pair)
24VDC use: FAS-1-033 HC (single pair)
FAS-2-033 HC (two pair)
24VAC use: FAS-1-043 HC (single pair)
FAS-2-043 HC (two pair)
48V Systems use: *FAS-1-060 HC (single pair)
*FAS-2-060 HC (two pair)
*Not UL Listed
Caution: The hybrid design of this product includes series
resistance. Do not place this product in service on any
signal line capable of continuously supplying more than
2.5 amperes.
General Technical Specifications
Ordering InformationInstallation
< 3
10– 14 AWG
GROUND LU G
PROTEC TED EQUIP.
EQUIP.
LIN E .
GROUNDING:
UNPROT ECTED O R FIELD S I DE
DO NOT daisy chain grounds. NOT intended for
shield termination. Install ground in accordance
with all applicable codes.
13
1S T CH OI CE : USE AC P OW ER
GRO UN D
2N D CH OI CE: USE B UI LD IN G