Brochures and Data Sheets

Exceeds category 6 transmission values
 Compact 1U rack size
 Low insertion loss
 Three stage hybrid
 1 year warranty
Part Number RM-CAT6-16R
Operating Voltage 5 V
Clamping Voltage 8.2 V
Frequency Range 0–250 MHz
Operating Current 0.15 A
SPD Technology GDT, SAD, W/Series PTC
Modes of Protection Signal High-Low,
Signal High-Ground,
Signal Low-Ground
Peak Surge Current 10 kA (8 x 20 µs)
Insertion Loss <0.1 dB
VSWR <1.2
Operating Humidity 0-95% Non-Condensing
Operating Temperature -40°C to +85°C
Input Connection Type RJ-45
Output Connection Type RJ-45
Mounting Rackmount
Enclosure Type Painted Steel
Dimensions 1.75Hx19Wx6.3D
Weight 5.5 lbs
Warranty 1 Year
General Technical Specifications
11
Part Number RM-CX06-16R
Operating Voltage 5 VDC
Clamping Voltage 6 VDC
Operating Current 0.15 A
Peak Surge Current 20 kA (8 x 20 µs)
Frequency Range 0–100 MHz
Insertion Loss < 0.1 dB at 20 MHz
SPD Technology GDT, SAD, w/Series PTC
Connection Type BNC, 50/75 Ohm
Operating Temperature -40°C to +85°C
Dimensions (Inches) 1.75H x 19W x 2.0D (1U)
Weight 3.2 lbs
Certifications UL 497B
Edco RM-CX06
CCTV Channel Rackmount
The Edco RM-CX06 Surge Protective Device (SPD) is a 16 channel coax
SPD implementing three-stage hybrid technology. The SPD addresses over-
voltage transients with a primary Gas Discharge Tube (GDT), and secondary
Silicon Avalanche Diode (SAD) components. Over-current protection, e.g.,
sneak and fault currents, are mitigated with solid-state resettable fuses — PTCs.
The Edco RM-CX06 SPD is designed in accordance with NFPA 780 (2004 edition)
requirements, with up to 20 kA of surge current capability.
General Technical Specifications
Features
 Sneak/fault current protection
 Low insertion loss
 Shielded case
 16 channel
 1 year warranty
Edco RM-CAT6 Series
CAT6 Channel Rackmount
The Edco RM-CAT6 is a 16-channel high-speed data line protector that utilizes
a three-stage hybrid design technology. This unit addresses high-energy
voltage transients that can damage expensive computer equipment. Ideal
for network switches and hubs, the Edco RM-CAT6 is easily mounted in close
proximity to the protected equipment.
Features
■
Data/Signal Line Protection