Brochures and Data Sheets

Filtering/Line Conditioning
5
APPLICATIONS
Islatrol
™
IE
Series
Islatrol
™
IC+/LRIC+
Series
Islatrol
™
SP-6TVN
Series
Islatrol
™
RM
Series
Programmable Logic
Controllers
*
Control Panels
(AC Power)
* *
Various OEM
Equipment
* *
Home
Entertainment/Office
*
AC Rack Equipment
PRODUCTS
Filtering/Line Conditioning — Product Selection Guide
Find your application in the left column.
Then look across for the appropriate product.
Edco
™
CX Series
CCTV & Data Applications/Coax
The Edco
™
CX06-M & Edco
™
CX06-MI Surge Protective Devices (SPDs)
implement three-stage hybrid technology. The SPDs address over-voltage
transients with a primary Gas Discharge Tube (GDT), and secondary Silicon
Avalanche Diode (SAD) components. Over-current protection, e.g. sneak and
fault currents, are mitigated with solid-state resettable fuses — PTCs. The Edco
™
CX06-M & Edco
™
CX06-MI SPDs are designed in accordance with NFPA 780
(2004 edition) requirements, with up to 20 kA of surge current capability. The
Edco
™
CX06-MI model has an isolated ground and is recommended for use at the
camera end.
Features
■ Sneak/fault current protection
■ Low insertion loss
■ Shielded case
■ CX06-MI has an isolated ground
■ 5 year warranty
Operating Voltage 5 VDC
Clamping Voltage 6 VDC
Operating Current 0.15 A
Peak Surge Current 20 kA (8 x 20 µs)
Frequency Range 0 to 20MHz
Insertion Loss < 0.1 dB at 20 MHz
SPD Technology GDT, SAD, w/Series PTC
Connection Type BNC, 50/75 Ohm
Operating Temperature -40°C to +85°C
Dimensions (Inches) M = 1.5H x 1W x 3.25L
MI = 1.5H x 1W x 4L
Weight M = 2.3 oz MI = 3 oz
Certifications UL 497B
Head End CX06-M
Camera End CX06-MI
Camera End CX06-MI-SBL
General Technical Specifications
Ordering Information
Edco
™
RM-CX06-16R
Channel Rackmount
The Edco
™
RM-CX06-16R Surge Protective Device (SPD) is a 16 channel coax
SPD implementing three-stage hybrid technology. The SPD addresses over-
voltage transients with a primary Gas Discharge Tube (GDT), and secondary
Silicon Avalanche Diode (SAD) components. Over-current protection, e.g.,
sneak and fault currents, are mitigated with new solid-state resettable fuses —
PTCs. The Edco
™
RM-CX06-16R SPD is designed in accordance with NFPA 780
(2004 edition) requirements, with up to 20 kA of surge current capability.
Features
■ Sneak/fault current protection
■ Low insertion loss
■ Shielded case
■ 16 channel
■ 1 year warranty
Operating Voltage 5 VDC
Clamping Voltage 6 VDC
Operating Current 0.15 A
Peak Surge Current 20 kA (8 x 20 µs)
Frequency Range 0 to 100 MHz
Insertion Loss < 0.1 dB at 20 MHz
SPD Technology GDT, SAD, w/Series PTC
Connection Type BNC, 50/75 Ohm
Operating Temperature -40°C to +85°C
Dimensions (Inches) 1.75H x 19W x 2.0D (1U)
Weight 3.2 lbs
Certifications UL 497B
General Technical Specifications
Data/Signal Line Protection
20