Brochures and Data Sheets

Features
■ Tip to ring protection
■ Tip and ring to ground protection
■ Over-current protection
■ Resettable solid state fuses — PTCs
■ UL Listed 497A
■ Requires PCB1B-WKEY base
■ PC642PTU (Pass Thru Unit)
available for troubleshooting
■ 5 year warranty
Edco PC2-TEL
Two Line Telephone Protection (Modular)
The Edco PC2-TEL is a solid state, two-line telephone interface protector module.
This unit is specically designed to protect both phone lines required by commercial
re/security panels.
EDCO PCB1B-WKEY BASE SOLD SEPARATELY
General Technical Specifications
Operating Voltage 250 VDC
Clamping Voltage 270 VDC
Operating Current 0.15 A
Peak Surge Current 160 A (10 x 1000 T & R to Ground)
Frequency Range 0 to 20 MHz
Insertion Loss < 0.1 dB at 20 MHz
SPD Technology Silicon Breakover Device w/Series PTC
Connection Type Terminal block w/ compression lugs
Terminals accept up to 10 AWG
Operating Temperature -40°C to +85°C
Dimensions (in / mm) 2.0˝ H x 1.0˝ W x 2.5˝ L
[50.8 x 25.4 x 63.5 mm]
(PC2TEL + PCB1B-WKEY Base)
Weight (oz / kg) 1 oz [0.03 kg]
Certications UL 497A, CUL
Warranty 5 years
Caution
Do not place this product in service on any signal line capable of continuously supplying
more than 150 mA.
Attention
Ne pas placer ce produit dans le service sur une ligne de signal capable de fournir en
permanence plus de 150 mA.
Ordering Information
2 Line Telephone PC2-TEL