Installation Manual

Edco CP-24 Series
Camera Power Surge Protector
CCTV
Power Switching & Controls
For Business-Critical Continuity
TM
The Edco CP-24 surge protector is easily installed directly at and in series with a
camera's power terminal. The Edco CP-24 uses 2.1mm jacks to connect to the
cameras power adaptor and power feed. High-speed SAD technology clamps high
energy transients that could damage the CCTV equipment.
Features
Fits 2.1mm Camera Power Jack
Works for 12 VDC, 24 VDC and 24 VAC
camera power
High energy silicon avalanche
technology
Operating current .5 Amps
Combination camera power/video kit
available.
1 year warranty
General Technical Specifications
Ordering Information
Attached in series with camera power wiring.
CP-24 (For 12 VDC, 24 VDC, 25 VAC Systems)
Maximum Operating Voltage 36.8 VDC
Clamping Voltage 59.3 VDC
Operating Current .5 A
Peak Pulse Power (10 x 1000 µs) 1500W
Peak Surge Current 25.6A
SPD Technology Silicon Avalanche Diode (SAD)
Connection Type 2.1mm x 5.5mm Female/Male Power Jack
Operating Temperature -40°C to +85°C
Dimensions (Inches [mm]) 2.240 [56.9] L x .460 [11.7] W
Weight 0.6 oz
Warranty 1 year

Summary of content (2 pages)