5000 BTU MODEL: EARC5RD1
INTRODUCTION IMPORTANT SAFETY INSTRUCTION ............................................................................ 1 ELECTRICAL REQUIREMENTS .................................................................................... 2 PACKING LIST ............................................................................................................. 3 INSTALLATION & ASSEMBLY INSTRUCTIONS ............................................................... 4 USING YOUR AIR CONDITIONER .........................
below: 1
7 8 2
3
FIG.
5 6 7 (Suggest to keep a downward angle, to let accumulated rain water to drain out, from back side of the unit bottom.
FIG. 13 Head 4 9 10 FIG. 9 FIG. 10 FIG. 14 FIG. 11 FIG.
1. Digital Display: Shows the set temperature. Operation modes are: Cool, Dry, Fan, and Auto. Time is displayed using the timer setting. 2. Mode Button: Press the mode button to cycle through the various modes: Cool, Dry, Fan and Auto. Cool Mode: The cooling function allows the air conditioner to cool the room and at the same time reduces humidity. Press the MODE button to activate the cooling function.
9. Fan Speed Button: Press the FAN SPEED button 5. Eco Button: When the unit is in ECO mode, the light will turn on. In ECO mode, the unit will turn-off once the room is cooled to the user set temperature. The fan will also be off at this point. The unit will turn back on when the room temperature rises above the user set temperature. Before the compressor stars, the fan motor will run for a while, then it will stop for a while-and will repeat to provide a much more comfortable-feeling and save energy.
1 5. Timer: Use buttons on the control panel and remote to set the TIMER. Timer Off: The timed stop is programmed by pressing TIMER button. Set the stop time by until your pressing the button or desired stop time is displayed, then press TIMER button again. Timer On: When the unit is off, press TIMER button first, set the temperature with pressing the button or . Press TIMER button a second time, set the stop time with pressing the button or .
15 FIG.
11
For any questions or Technical Support, Please Call Customer Service: 1-844-801-8880 12
