Brochure

CONTROLS, ENCLOSURES & PANELBOARDS

ATEX/IECEx/NEC/CEC

PANELBOARDS POWERPLEX 304 STAINLESS STEEL PANELBOARD

Appleton’s PowerPlex™ panelboard delivers component level protection that increases hazardous

location safety and  exibility while greatly reducing and simplifying maintenance. It transfers the

 amepath from the panelboard enclosure to individual circuit breaker housings. Its module design

o ers the convenience of  eld replaceable o the shelf breakers. Standard panelboards are cCSAus

certi ed and UL Recognized. Select models are ATEX/IECEx rated. PowerPlex panelboards are

most commonly used for lighting, power, heat tracing, electrical distribution and control, MOV

(motorized operated valve), temporary power and other electrical equipment.

• Field replaceable, standard North American Cutler-Hammer F-Frame or QC Series

circuit breakers

• Lightweight design simpli es installation

• Supplied with standard hard drawn, tin plated copper bus bar allows more wiring space

• Easy access allows for quick, safe and simpler maintenance

• GFI version, 5mA and 30mA, single pole, 40 Amp maximum

• Standard supply with internal actuation. Choice of window or self-aligning external actuation

• Modular design and  exible mounting footprint provide almost endless breaker con gurations

• Optional heaters for extreme cold weather conditions and specially calibrated breakers for

higher ambient

ATEX/IEC

PANELBOARDS INCREASED SAFETY PANELBOARDS

Appleton’s ATX series of increased safety distribution panels are available in IP 66 rated  berglass

reinforced polyester (FRP) or 316L stainless steel and come in multiple sizes depending on the

number of circuits required. Modularity enables coupling together, allowing for additional circuits

and the capability to add main circuit protection. Distribution panels are ATEX approved for use

in locations classi ed as Zone 1-2 and 21-22 locations.

• Cover mounted, oversized lockable knob enables external operation of main and

branch breakers

• Modular designs come in standard sizes and can be interconnected for additional breakers

and main breakers

• Single, 2-, 3-, 4-pole and earth protection (RCD) breakers available up to 690 volts

• Auxiliary contacts available

IEC

PANELBOARDS NEPAC DISTRIBUTION, POWER AND PROTECTION PANEL

Appleton’s Nutsteel NEPAC Series of Ex d IIB panelboards come fully assembled with circuit

breakers and copper bus bar up to 150 Amp interconnected to the internal wiring.  ese

explosionproof panels are designed for powering, distribution and protection of electrical circuits in

Zone 1-2 locations.

• 2-pole or 3-pole circuit breaker up to 125 Amp, IEC 60947-2 standard, breaking capacity:

20 kA at 220/240 V, 10 kA at 400/415 V, 6 kA at 440 V

• 1-pole or 2-pole circuit breakers from 6 to 32 Amp, IEC 60947-2 standard, breaking capacity:

10 kA at 220/240 V (1-pole), 20 kA at 220/240 V (2-pole), 1 OkA at 400/415 V (2-pole),

6 kA at 440 Vac (2-pole)

• Revesteel® anticorrosive coated aluminum body and cover

• Cover  xed with captive screws. All hardware is made of AISI 304 stainless steel