Brochure

CONTROLS, ENCLOSURES & PANELBOARDS

ATEX/IEC

STARTERS MOTOR STARTERS

Appleton’s ATX series of Ex d  ameproof motor starters and contactors are compact but rugged

for long lasting use in hazardous environments.  ese motor starters are available in three electrical

con gurations: DOL (Direct on Line), YD Star-delta and reversing with breaking capacity from

.37 to 75 KW up to 690 volts.  e IP 66 rated enclosure comes in a variety of sizes dependent

upon the size of starter and the option chosen. Ex d  ameproof motor starters are approved for use

in Zone 1-2 and 21-22 locations.

• Marine IP 66 rated cast aluminum with powder polyester  nish comes in three sizes depending

upon start/contactor size

• Available from .37 to 75 KW up to 690 volts

• Motor starters can be con gured for various controls, such as pushbuttons, selector switches

and pilot lights

• All exterior hardware is 316 stainless steel

• Supplied complete with protection breaker

• Various cable entry sizes can be drilled and tapped

IEC

STARTERS NEPPS AND NEPPM MOTOR STARTERS

Appleton’s Nutsteel NEPPS and NEPPM Series are designed for use in Ex d IIB, Zone 1-2

locations.  e NEPPS Series are designed for DOL (Direct on Line), starters for motors up to

0.75 HP at 220 V (1-phase), 1 HP at 220 V (3-phase) and 2 HP at 380 V (3-phase).  e NEPPM

Series is designed for DOL starters up to 60 HP at 220 V, 100 HP at 380 V or 125 HP at 440 V.

• Fully assembled with the following components:

- Contactor

- Circuit breaker

- Time delay relay, adjustment 6-60 seconds

- “On” - “O ” button

- Indicator light

- Overload relay

- External grounding terminal

•  e time relay assures automatic shutdown in 60 seconds, if the operator does not press the

reset button

• Revesteel® anticorrosive coated copperfree aluminum body and cover

• Cover  xed with captive screws. All hardware is made of AISI 304 stainless steel