Brochure

CONTROLS, ENCLOSURES & PANELBOARDS

ATEX/IECEx/NEC/CEC

ENCLOSURES FIBERGLASS REINFORCED POLYESTER TERMINAL ENCLOSURES

Appleton’s ATX JBEP Series of increased safety enclosures are o ered with an IP 66 rating and are

available in multiple sizes depending on the number of terminals installed.  eir modular design

allows for similar sized terminal enclosures to be coupled together for ease of wiring during  eld

installation. Terminal enclosures are ATEX approved for use in Zone 1-2 and 21-22 locations.

• Removable gland plates available

• Cable glands installed per customer requirements

• Carbon impregnated enclosure for static resistance

ATEX/IECEx/NEC/CEC

ENCLOSURES 316L STAINLESS STEEL TERMINAL ENCLOSURES

For corrosion-resistance, a clean appearance and  exible application options, Appleton’s ATX series

of stainless steel increased safety boxes and enclosures are the answer. Boxes are available in a variety

of sizes with depths ranging from 95 mm to 300 mm (4 in to 12 in).  e boxes come ready to be

drilled on site or come pre-drilled from the factory. Doors are reversible and open either up and

down or to the left and right. Each box features reversible anti-vibration mounting brackets.

• Vertical and horizontal mounting options

• Available with up to 204 cable entries per box face

• Optional removable padlock device

• Can be custom made to your speci cations. Contact our Technical Support group

ATEX/IEC/NEC/CEC

ENCLOSURES INCREASED SAFETY JUNCTION BOXES

Junction boxes are available in a wide range of con gurations for increased safety applications.

Boxes for non-armored and armored cable come in high impact resistant polycarbonate bodies and

covers. Appleton’s ATX series of junction boxes feature two kinds of terminals: a spur multicore

pillar terminal and junction isolated terminals that can be clipped onto a DIN rail.

• Body and cover available in four materials

• Available with identi cation labels

• Corrosion-resistant

ATEX/IEC/NEC/CEC

ENCLOSURES AJBEW SERIES

 e AJBEW Series junction box can be used to house control stations, starters, breakers, relays and

meters. It can also be used for splicing wire terminals or as a pull box, bus box or custom panel in

Class I and II locations.  e AJBEW is made from cast copperfree aluminum and can be mounted

vertically or horizontally with a wide range of drilled and tapped outlet options.

• Hinges are standard on 300 mm to 300 mm (12” x 12”) and larger sizes

• Optional gray epoxy powder coat provides NEMA 4X rating

• Custom drilling and tapping