Specifications

• I-9
system configuration menu 10-7
system information menu 10-8
Screens
Main Status 10-3
Status 10-5
Sensor Control
analog
alarm control 11-38
combiner function 11-38
cut in/cut out control 11-38
analog sensor control modules 11-38
digital
alarm control 11-39
logical combination methods 11-39
digital sensor control modules 11-38
Sensors
analog
E2 setup 9-7
analog liquid level indicator
wiring to input board 9-4
bullet and pipe mount
mounting 3-9
coil in temperature
location 3-9
mounting 3-9
coil out temperature
location 3-9
mounting 3-9
dewpoint probe 3-11
location 3-11
mounting 3-11
wiring to input board 9-5
digital
selecting units 9-9
wiring to input board 9-3
Hansen probe. See Sensors, liquid level
probe.
humidity
connecting to a case controller 9-15
installation 3-9
indoor RH sensors 3-9
outdoor RH sensor 3-10
insertion probe 3-8
location 3-8
mounting 3-8
inside temperature 3-7
location 3-7
mounting 3-8
Klixons
wiring to input board 9-3
KW Transducer
wiring to input board 9-6
light level
location 3-11
mounting 3-11
wiring to input board 9-4
liquid level
mounting 3-11
liquid level probe
wiring to input board 9-5
offsets 9-9
outside temperature 3-8
location 3-8
mounting 3-8
power connections on input boards for 9-2
pressure transducers
Eclipse
wiring to input board 9-3
Eclipse voltage-to-pressure chart B-1
mounting 3-7
refrigeration probes and sensors 3-9
location 3-9
mounting 3-9
relative humidity
wiring to input board 9-3
sail switches
wiring to input board 9-3
supply and return air
mounting 3-8
temperature
temp-to-resistance chart B-1
wiring to input board 9-3
Wiring To 16AI/8IO Input Points 9-1
Separate Setpoints 11-24
configuration 11-53
Serial Configuration 5-1
Serial Connection Manager 5-1
Serial Tab 5-1
Service Button 10-17
CC-100 10-18
Setpoints
separate 11-24