Brochure

CLASS I, DIVISION 1 & 2

APPLETON PANELBOARDS

FACTORY SEALED POWER PANELBOARD

No matter what the hazard, from the smallest dust particles to combustible

gas and vapors in wet and corrosive conditions, APPF Panelboards furnish

unwavering protection.  ese units come factory sealed for an extra measure

of safety and convenience. Use them to provide a centrally controlled switching

system for large quantities of branch circuits for lighting, heating, small motors

and other electrical equipment.

Electrical Characteristics/Properties

• Permits selection of 1-, 2- or 3-pole breakers

• 12-circuit to 42-circuit panelboard con gurations

• 100 Amp or 225 Amp main lug

• Up to 225 Amp main breaker available

• Up to 100 Amp backfed main breaker available

(400 Amp available, consult factory)

Features

• Panel pre-drilled for future expansion

• Copper bus bars are standard

• Quad-Lead

stainless steel cover bolts are standard

• Padlockable breaker operators in either ON or OFF position without

interfering with tripping of breakers

• Top feed standard, bottom feed optional

Standard Materials

• Enclosures: copperfree (4/10 of 1% max.) aluminum

Certi cations

• Class I, Division 1 and 2, Groups B, C, and D

• Class II, Division 1 and 2, Groups E, F, and G

• Class III

• Class I, Zone 1, Group IIB +H

• NEMA 4, 4X, 7BCD, 9EFG

• UL Classi ed - Standard 67, 877, 1203

• CSA Certi ed - Standard C22.2, Nos. 29, 30

APPF SERIES

FACTORY SEALED LIGHTING PANELBOARD

Electrical Characteristics/Properties

• Available voltages are 120/208, 120/240 and 240 Vac

ALPF SERIES