Technical Specifications

Air Flow Management, Shelves and Brackets
Vertical Blanking Panels
Full height vertical blanking panels that mount to outside edge of 19” rail and extend to the
plane of the side panel. The vertical panels for the DCM rail utilize 2 half height panels per side.
Each kit is enough for 1 cabinet. Each panel has three 1U vertical cutouts that may be used for
cable pass through or mounting, or may be covered with the included metal blanking panels.
Dimension Part Number
42U x700mm (28") 539952G2L
42U x 800mm (32") 539957G2L
45U x700mm (28") 539961G2L
45U x 800mm (32") 539962G2L
Description Part Number
Fixed tool-less shelf, 275 lb rating
002185000
2U fully enclosable and lockable drawer, mounts on 19” rails 30lb load rating
011139278L
Tool-less telescopic shelf, 110 lb rating
535809G1
“L” shaped depth support rails, 2 pieces
542777G1L
600mm W XDV mounting bracket
543548G1
700mm W XDV mounting bracket
543551G1
800mm W XDV mounting bracket
543552G1
1000mm W XDV mounting bracket
548515G1
Air Diverter for IT Switches
4U 540785G1L
12U 540785G2L
15 U 540785G3L
21U 540785G4L
Set of (2) 19” Rails
42U 539814G1
45U 539818G1
Description Part Number
1U tool less blanking panel that mounts in 19” rails with square holes.
Qty: Box of 10
010200087
2U tool less blanking panel that mounts in 19” rails with square holes.
Qty: Box of 5
010200088
RPCBDM Bracket mounts to extrusion
538619G1L
RPCBDM Bracket mounts to T-slot
541100G1L
1U metal blanking panel with Brush
542190G1L
9
19” Fixed tool-less shelf
19” Tool-less Telescopic Shelf
“L” Shaped Depth Support Rail
Tool-less Blanking Panel
2U Drawer, mounts on 19” rails
Shelves, Blanking Panels and Drawers