Brochures and Data Sheets

The Flexible Rack Solution For Cisco
®
Nexus™ Switches
DCM™ modular racks from Emerson Network Power
are available in congurations specically designed to
meet size, airow and cable management requirements
for Cisco Nexus 7010 and 7018 Switches. Precongured
solutions are available in 42U, 45U and 52U heights,
providing choices for most applications.
DCM racks provide better airow management for these
Cisco switches, through 83% perforated front and rear
doors and integrated airow bafe system. Pre-installed
cable management features allow for proper cable
management, resulting in further airow improvements.
Lift-off hinges, reversible doors and innitely adjustable
rails ensure exibility and convenience for equipment
additions and changes.
Key Features
Flexibility:
Full height vertical cable managers provide integral
bend radius control and align with “U” markings for
simplied cable management.
Two full height PDU mounting brackets allow for easy
PDU installation or additional rear cable management.
Additional cable management accessories:
tool-less lobster claws and Velcro straps, front
to rear cable troughs.
Higher Availability:
Integrated bafe system to allow for proper airow
of side breathing equipment in hot aisle/cold aisle
settings, and allow for front to rear cable pass-through.
Additional airow management accessories include
1U and 2U tool-less blanking panels.
Lowest Total Cost of Ownership
Pre-congured with cable management and airow
bafes, reducing overall installation time.
Reduces costs and lead times with
standardized components.
DCM rack for Cisco
Nexus 7010
Front-to-back airow is
optimized through 83%
perforated doors, vertical
airow bafes, and use
of blanking panels.
DCM rack for Cisco
Nexus 7018
Airow for these side-
breathing switches is
accomplished through
83% perforated doors,
integrated bafes, and
use of blanking panels.
2