User's Manual

Major Components
2
2.0 MAJOR COMPONENTS
DCF Optimized Rack System will have all of the components addressed in this section. All
components are finished with a textured powder coat, color is RAL 7021.
2.1 Frame
The DCF Optimized Rack System is constructed of hot and cold rolled steel. Frame is light weight and
strong with a 3000lb static load rating.
2.1.1 Adjustable Rails
The DCF Optimized Rack System ships with 2 sets of 19" (EIA310-E) compliant rails. The 19" rails
have U marking labels on both sides of the rails. Front and rear mount rails are installed in the DCF
at 29.13" (740mm).
2.1.2 Full Height Rack PDU/Cable Management Bracket
Each DCF rack leaves the factory with two full height rack pdu/cable management brackets installed.
The brackets are installed in the rear of the rack, flush against the frame, one bracket installed on
each side of rack.
2.1.3 Casters
DCF Optimized Rack System ships standard with 4 swivel, non-locking casters installed.
Figure 1 Caster plate
2.2 Enclosure
Exterior components of the DCF Optimized Rack System are finished in textured powder coat, color
RAL 7021.
2.2.1 Doors
All doors for the DCF are framed from sheet metal and have hexagonal perforations leaving 75% open
for airflow and efficient cooling. All doors have a single point latch system and come standard with
lock. The DCF rack ships with a single contoured perforated front door and split perforated rear doors
designed for easy access. All doors can easily be removed and the single contoured front door is
designed for reversibility (left/right) hinging in the field. (See 3.4.2 for door removal and reverse.)
Each door opens to 135 degrees.