User's Manual

Installation
12
3.7 Baying Configuration
Two or more DCF cabinets of the same height can be bayed with the supplied baying brackets. The
brackets have three holes: one that connects to the DCF, one that puts the cabinets on 24" (609.6mm)
centers and one that puts the cabinets on metric centers.
Connecting DCF racks is easier if the units have been moved to their final installation position before
beginning to attach them in a cluster.
Figure 12 Baying brackets
Screws and
baying brackets
to connect DCF
cabinets
Using outer holes puts
cabinets on 24" centers.
Using the center hole
and the hole at the far
left puts the racks on
metric centers.