User's Manual

Installation

Figure 6 19" EIA rail repositioning

Position 19" EIA Rails on 800mm Cabinets

1. Determine the proper location of the 19" EIA rails.

2. Loosen the two screws that secure the node adjustment brackets to the bottom frame member,

then slide the bracket down.

Repeat on the other two node adjustment brackets attached to the frame and center support

member.

3. Slide the 19" EIA rails to their new location. The rails will bind if they are not kept at a right

angle to the frame.

4. Tighten all hardware.

Figure 7 19" EIA rail repositioning—800mm cabinets

Holes in frame member

are 6.35mm apart

Loosen this screw

to let rail slide

19" EIA

rail face

Frame

member

where 19"

EIA rail is

attached

Node bracket attached at the

center depth support

Node Adjustment Bracket

Hangs on frame member and

depth support member

EIA Rails

attach

here