Technical data

THE LIEBERT DataMate3000 ENVIRONMENTAL
CONTROL SYSTEM
The DataMate3000 is a small precise environmental control system specially designed for electrical system
room cooling. Featuring high reliability, high sensible heat ratio and big air volume, the system is suitable for
controlling the temperature and humidity (optional) in system or computer room to maintain a favorable
environment for precise systems such as sensitive systems, process control systems, communication
systems and computers.
This system has two models with nominal ratings of 5 kW, 7kW and 12kW respectively, which can be
selected according to the actual room heat loads.
Each DataMate3000 consists of an indoor direct expansion evaporator module and an outdoor air cooled
condensing module. Both modules are installed on the ground.
The indoor unit has two series, standard DME3000 and DME3000 S series. The DME3000 S series is mainly
for 220V/1 Ph/50Hz use and the standard DME3000 is for 380V/3 Ph/50Hz power supply.
The outdoor unit has two models, standard model and Lee Temp model. The Lee Temp model can be used
at lower temperature. Detailed parameters are shown in Table 3-1.
The system may also include optional heater and humidifier. Models available for cooling only do not include
heater and humidifier.
The standard DataMate3000 system includes cooling parts for temperature control. The optional humidity
control uses the optional heater and humidifier to keep the favorable humidity.