Specifications

Reference Manual
MHM-97408, Rev. 2
June 2008
CSI 9420
www.mhm.assetweb.com
Appendix B Product Certifications
Approved Manufacturing Locations . . . . . . . . . . . . . . . . . page B-1
Wireless Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-1
FCC and IC Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-1
Hazardous Locations Certificates . . . . . . . . . . . . . . . . . . . page B-2
Patents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-3
APPROVED
MANUFACTURING
LOCATIONS
Emerson Process Management - MHM, Knoxville, Tennessee, USA
Benchmark Electronics, Inc., Angleton, Texas, USA
WIRELESS
CERTIFICATIONS
Telecommunication
Compliance
All wireless devices require certification to ensure that they adhere to
regulations regarding the use of the RF spectrum. Nearly every country
requires this type of product certification. Emerson is working with
governmental agencies around the world to supply fully compliant products
and remove the risk of violating country directives or laws governing wireless
device usage.
FCC and IC Approvals This device complies with Part 15 of the FCC Rules. Operation is subject to
the following conditions: This device may not cause harmful interference, this
device must accept any interference received, including interference that may
cause undesired operation.
This device must be installed to ensure a minimum antenna separation
distance of 20 cm from all persons.
Telecommunication Compliance
900 MHz:
FCC ID: SJC-M1030
IC ID: 5853A-M1030
2.4 GHz, pending:
FCC ID: LW2RM2510
IC ID: 2731A-RM2510