Specifications

Reference Manual
MHM-97408, Rev. 2
June 2008
CSI 9420
3-12
Table 3-4. Connecting One
Sensor with temperature
AMS Device Manager Wireless and Direct Connections
AMS Device Manager is capable of connecting to devices either directly,
using a HART modem, or wirelessly via AMS Device Manager. When
configuring on the bench using a HART modem, double click the device icon
(or right click and select Configure/Setup), then choose the Configure/Setup
tab. When configuring wirelessly via the 1420, double click the device icon (or
right click and select Configure/Setup), then choose the Configure/Setup tab.
Configure the device settings using the Wireless Connection menu.
To check or change sensor configuration using a 375 Field Communicator,
enter the following Fast Key Sequence: 1, 1, 3.
Connecting One Sensor (accelerometer with temperature)
Connector labeled 1
-
Red wire
Connector labeled 2 -
White wire
Connector labeled 3 -
Temperature wire
(green wire)
Connector labeled 4
- Black wire