Specifications

Reference Manual
MHM-97408, Rev. 2
June 2008
2-9
CSI 9420
Fast Key Sequence Table 2-3 lists the fast key sequences for common transmitter functions.
NOTE:
For the 900 MHz CSI 9420, the fast key sequences assume that DD Dev v1,
DD v9 is being used.
For the 2.4 GHz CSI 9420, the fast key sequences assume that DD Dev v2,
DD v2 is being used.
This is true for all fast key sequences.
Table 2-3. CSI 9420 Fast Key Sequence
CALIBRATION Sensor Ranges
NOTE
The word “sensor” refers to both an accelerometer and an accelerometer with
embedded temperature. The word “accelerometer” refers to a sensor that
measures only acceleration.
Each of the CSI 9420 signal inputs uses accelerometers to make vibration
measurements. Alternately, an accelerometer with embedded temperature
may be used.
Sensor Sensitivity
Each sensor was characterized at the factory to determine the precise
sensitivity of the sensor. This information is included with the sensor in the
form of a certificate, and may be cross-referenced with the serial number as
shown in Figure 2-5 on page 2-10.
Function Key Sequence Menu Items
Device Information 1, 1, 8
Tag, Date, Descriptor, Message, Distributor, Write Protect,
Model, Dev ID, Final assbly num, Revision #’s
Network 1, 1, 7 Network ID, Set Network ID / Join Key
Sensor Config 1, 1, 3 Sensor 1, Sensor 2, Calibration
Variable Mapping 1, 1, 2
PV is, SV, is, TV is, QV is
Alarm Levels 1, 1, 6
Overall Velocity Sensor 1, Overall Velocity Sensor 2, PeakVue
Sensor 1, PeakVue Sensor 2, Temperature,Supply Voltage
Calibration 1, 1, 3, 3
Sensor 1, Sensor 2, Defaults