Specifications

Reference Manual
MHM-97408, Rev. 2
June 2008
CSI 9420
2-6
HART MENU TREE For HART communication, a CSI 9420 DD is required. The wired HART menu
tree for configuration is shown in Figure 2-3 and Figure 2-4. All of settings that
have been discussed in this section, as well as any other device configuration
options, are accessible by navigating this menu.
Options listed in bold type indicate that a selection provides other options. For
ease of operation, changing calibration and setup, such as sensor type,
number of wires, and range values, can be completed in several locations..